Prebonder surface pro 50 µm
Recommended abrasive for the Basic prebonder XS protocol.
Basic Prebonder XS Renfert microblaster for adhesive cementation
Earn 17 loyalty points
Référence: 900030375
European delivery depending on destination
Secure payment by credit or debit card
Secure payment with PayPal
PayPal may offer Pay in 3 if the customer and purchase are eligible
Credit / debit card
PayPal
Bank transfer
* Instalment payment may be offered by PayPal subject to customer and purchase eligibility. Available options may vary depending on the PayPal account.
Brand: Renfert Ref. 29695000 Basic prebonder XS Compact microblaster Pre-bonding 0.6 – 1 bar
Basic prebonder XS Renfert – compact microblaster for surface conditioning prior to adhesive cementation
The Basic prebonder XS Renfert is a compact single-tank microblaster designed to standardise surface conditioning before adhesive cementation.
It enables the preparation of zirconia, metal alloys, hybrid materials and modern polymers under defined conditions, using low and controlled blasting pressure.
With its XS format, precision pressure gauge, Prebonder control tip, Prebonder jet-nozzle and Prebonder control pad, it provides a simple and reproducible solution suited to dental practices and laboratories already equipped with a blasting cabinet or dedicated blasting box.
Controlled pre-bonding Conditioning prior to adhesive cementation
Compact XS format 123 x 202 x 255 mm
Low pressure Bonding microblasting from 0.6 to 1 bar
Complete system Nozzle, tip, control pad and abrasive included
A compact system to standardise blasting before bonding
The Basic prebonder XS has been designed to transform a sensitive, technique-dependent step into a more controlled process: surface conditioning prior to adhesive bonding.
Unlike conventional blasting focused on material removal, the Prebonder system aims for controlled surface activation, using specifically coordinated components: defined working pressure, special nozzle, spacer tip, qualified abrasive and visual control of blasting energy.
Its compact design allows easy integration into an existing workstation, together with a blasting cabinet, blasting box or suitable extraction area.
The clinical and technical need
Before adhesive cementation, the quality of surface pretreatment directly influences the consistency of the bonding protocol.
Overly aggressive blasting may adversely affect the material structure or surface wettability, while insufficient blasting may reduce the activation required for adhesion.
The challenge is therefore to obtain appropriate, repeatable and controlled blasting energy, especially on modern materials such as zirconia, alloys, hybrids or polymers.
The Basic prebonder XS solution
The Basic prebonder XS Renfert combines low microblasting pressure, a dedicated nozzle, a spacer tip and power control via a control pad.
This system helps the user maintain a defined working distance, control the impacted area and quickly check blasting energy before treating the restoration.
The intended result is a more standardised, clearer and more reproducible conditioning process.
Main applications
Zirconia pretreatment
Conditioning of zirconium oxide before bonding or adhesive cementation protocols.
Metal alloys
Controlled activation of metal surfaces before bonding, repair or prosthetic assembly.
Hybrid materials
Preparation of modern hybrid materials requiring controlled blasting energy.
Modern polymers
Conditioning of polymer surfaces within a defined pre-bonding protocol.
Benefits for the dental practice or laboratory
- Standardised process for conditioning before adhesive cementation.
- Compact format that is easy to integrate into an existing workstation.
- Low working pressure suited to bonding microblasting.
- Integrated spacer tip to help control the working distance.
- Special Prebonder nozzle for more homogeneous surface activation.
- Control pad for quickly checking blasting power before use.
An approach focused on reproducibility
The Basic prebonder XS does more than project an abrasive: it is part of a system designed to control several critical parameters.
Pressure, working distance, nozzle geometry, abrasive and blasting energy control all contribute to securing a sensitive step in the adhesive protocol.
Key components of the Prebonder XS system
Prebonder control tip
Spacer tip designed to help maintain a defined working distance between the nozzle and the restoration surface.
Prebonder jet-nozzle
Special nozzle developed for homogeneous abrasive projection and consistent surface activation.
Precision pressure gauge
Clear display with working range allowing blasting to be adjusted within the recommended zone.
Prebonder control pad
Control pad used to quickly check jet energy before treating the restoration.
Recommended Prebonder surface pro 50 µm
The Basic prebonder XS system is designed to operate with Prebonder surface pro 50 µm abrasive.
This high-purity aluminium oxide completes the Prebonder system: particle size, geometry, hardness, purity, pressure and nozzle are designed to work together.
- 50 µm aluminium oxide.
- Dedicated abrasive for the Prebonder system.
- Recommended use for reproducible results.
- Compatible with the Basic prebonder XS abrasive chamber designed for this abrasive.
Why avoid non-dedicated abrasives?
Abrasives with a similar stated particle size may differ in shape, hardness, purity or blasting behaviour.
To preserve the logic of the Prebonder protocol, it is recommended to use the consumable designed for the system.
Basic prebonder XS Renfert video
Discover the Basic prebonder XS Renfert in use, with a demonstration of the microblasting protocol for surface conditioning prior to adhesive cementation.
Technical specifications of the Basic prebonder XS Renfert
| Product | Basic prebonder XS |
|---|---|
| Brand | Renfert |
| Manufacturer reference | 29695000 |
| Product type | Microblaster for surface conditioning prior to adhesive cementation |
| Use | Microblasting for bonding / pre-bonding |
| Structure | Compact single-tank unit |
| Housing dimensions | 123 x 202 x 255 mm |
| Working pressure | 0.6 to 1 bar |
| Connection pressure | 6 to 8 bar |
| Volumetric flow rate at 1 bar | 8 to 9 l/min |
| Abrasive chamber volume | 300 ml |
| Empty weight | 1.5 kg |
| System abrasive | Prebonder surface pro 50 µm |
| Intended setting | Dental practice, laboratory or workstation equipped with a suitable blasting area |
Basic prebonder XS spare parts – version A
The official Renfert spare parts list makes it possible to identify components compatible with the Basic prebonder XS reference 29695000.
| Position | Spare part | Reference |
|---|---|---|
| 3 | Mixing chamber 25–70 µm master/classic/quattro/eco | 900036386 |
| 4 | Filter cartridge | 900021431 |
| 5 | Classic maintenance unit | 900036599 |
| 10 | Prebonder control tip – 5 pieces | 900039010 |
| 11 | Prebonder jet-nozzle – special nozzle | 900038070 |
| 12 | Prebonder control pad 50 µm – 5 pieces | 900030375 |
| 13 | Prebonder in-line pressure regulator 2 bar | 900033203 |
| 14 | Magnetic switch | 900035447 |
Protocol implementation
The procedure is performed with pressure set within the range suitable for bonding microblasting.
The pressure gauge allows pressure control, while the handpiece must be used inside a blasting cabinet, blasting box or suitable extraction area in order to contain the abrasive.
- Set the pressure within the recommended working range.
- Place the handpiece inside the cabinet or dedicated box.
- Use the control pad to check jet energy.
- Maintain a stable distance using the control tip.
- Treat only the relevant areas of the restoration.
Power control with the control pad
The Prebonder control pad allows a quick check that blasting energy is correctly adjusted before working on the restoration.
This step helps secure the protocol and limit variations linked to pressure settings or working distance.
- Quick check before use.
- Visual reading by colour change.
- Assists adjustment of blasting energy.
- Practical support for a reproducible process.
Care and maintenance
To preserve the performance of the Basic prebonder XS, the unit must be maintained regularly and disconnected from compressed air before any cleaning or maintenance operation.
- Regularly check the tank and lid.
- Clean the exterior with care.
- Avoid cleaning agents containing solvents.
- Check the water separator and drain condensate if necessary.
- Monitor the condition of the nozzle and wear parts.
Points requiring attention
Moist abrasive or impurities can disrupt dosing and cause blockages.
Cleaning the dosing nozzle and checking the filter cartridge are among the operations to plan according to the use of the unit.
- Use a clean and suitable abrasive.
- Do not expose plastic parts to solvents.
- Check components subject to wear.
- Refer to the Renfert maintenance document for detailed procedures.
System accessories and recommended consumables
| Accessory | Reference | Function |
|---|---|---|
| Prebonder surface pro | 15970050 | High-purity 50 µm aluminium oxide for surface activation |
| Basic prebonder control pad | 900030375 | Control pad for checking blasting power |
| Basic prebonder jet nozzle | 900038070 | Special nozzle for uniform surface activation |
| Basic prebonder control tip | 900039010 | Spacer tip for a defined working distance |
Recommended complementary products
Prebonder control pad
Control pad for checking blasting power.
Prebonder control tip
Spacer tips for maintaining a consistent working distance.
Delivery contents
Delivery: Basic prebonder XS Renfert reference 29695000.
- 1 Basic prebonder XS with Basic prebonder abrasive chamber.
- 1 special Basic prebonder jet nozzle.
- 1 spacer tip / focusing aid Basic prebonder control tip.
- 1 Ergo handle.
- 1 flexible hose with 2-bar pressure reducer.
- 500 g of Prebonder surface pro.
- 4 replacement Basic prebonder control tips.
- 1 Basic prebonder control pad for checking blasting power.
- 1 handpiece holder.
- 1 pneumatic foot switch.
- 1 EU / United States pneumatic connection kit.
- 1 tool for dosing connector.
Documents and resources
Official spare parts list for Basic prebonder XS reference 29695000 version A.
Basic prebonder XS user document.
Maintenance, disassembly and repair instructions for Basic prebonder XS components.
Renfert declaration of conformity for the relevant dental sandblasters, including the Basic prebonder XS.
Conformity and identification
The Basic prebonder XS is listed in Renfert conformity documentation for dental sandblasters.
The declaration of conformity mentions the model Basic prebonder XS 2969 5000, as well as the European requirements applicable to the products listed in the relevant annex.
Commercial reference used on this product sheet: 29695000.
FAQ – Basic prebonder XS Renfert
What is the Basic prebonder XS Renfert used for?
The Basic prebonder XS is used for surface conditioning prior to adhesive cementation.
It enables controlled microblasting on zirconia, metal alloys, hybrid materials and modern polymers before bonding.
What is the difference compared with a conventional sandblaster?
A conventional sandblaster is often used for cleaning or material removal.
The Basic prebonder XS is focused on pre-bonding: it combines low pressure, a special nozzle, a spacer tip and a control pad to obtain more reproducible conditioning before bonding.
Which materials can be pretreated?
The unit is intended for pretreating zirconium oxide, metal alloys, hybrid materials and modern polymers.
It must be used as part of an adhesive cementation protocol adapted to the material being treated.
Which abrasive should be used with the Basic prebonder XS?
The system is designed to work with Prebonder surface pro 50 µm.
Renfert presents this abrasive as an integrated component of the Prebonder system in order to obtain reproducible results.
What is the working pressure?
The working pressure for bonding microblasting is 0.6 to 1 bar.
The connection pressure of the installation must be between 6 and 8 bar.
Is the Basic prebonder XS compact?
Yes. Its dimensions are 123 x 202 x 255 mm with an empty weight of approximately 1.5 kg.
It is designed for easy integration into existing setups equipped with a suitable blasting area.
Is the control pad included?
Yes. The delivery contents include one Basic prebonder control pad for checking blasting power.
Replacement control pads are also available as spare parts or accessories.
Where can spare parts be found?
Official spare parts are available in the dedicated Renfert block for reference 29695000 version A.
It includes, among other parts, the control tip, jet-nozzle, control pad, filter cartridge and in-line pressure regulator.
An XS system to make pre-bonding clearer, more compact and more reproducible
The Basic prebonder XS Renfert is a compact solution intended for clinicians and laboratories seeking better control of surface conditioning prior to adhesive cementation.
With its low pressure, precision pressure gauge, control tip, jet-nozzle, control pad and dedicated Prebonder surface pro 50 µm abrasive, it provides a structured approach to pre-bonding microblasting.
With its reference 29695000, compact design and access to manufacturer documents, spare parts and conformity information, it represents a relevant professional unit for standardising restoration pretreatment before bonding.
Basic Prebonder XS Renfert microblaster for adhesive cementation