TOSOH Zirconia Disc 20 mm Whitepeaks CopraSupreme ML PRO – 98 mm
Référence: 102111982000
Whitepeaks CopraSupreme ML PRO Zirconia Disc – High-Strength Smart Gradient Multilayer Zirconia
The Whitepeaks CopraSupreme ML PRO 20 mm is a multilayer dental zirconia disc with a 98 x 18 mm diameter, designed for CAD/CAM milling of dental prosthetic restorations.
With a 20 mm disc thickness, this version provides additional vertical space for positioning restorations within the blank, particularly when their anatomy or orientation requires a greater milling height than thinner discs can accommodate.
CopraSupreme ML PRO combines a flexural strength of approximately 1,200 MPa after sintering with translucency of up to 45%. These properties make it suitable for various anterior and posterior dental restorations, according to Whitepeaks' indications.
Its Smart Gradient technology distributes shades across five main layers connected by four transition zones. In this 20 mm version, each main layer has a nominal height of 4 mm.
Manufactured from TOSOH zirconia powders using an isostatic pressing process, this material is designed for dental laboratories seeking to integrate strong, aesthetic multilayer zirconia into their daily digital production workflows.
CopraSupreme ML PRO: Multilayer Zirconia for Demanding Dental Restorations
For dental laboratories, selecting the appropriate zirconia disc thickness directly influences the positioning options available when preparing CAD/CAM milling jobs.
The CopraSupreme ML PRO 20 mm version provides greater material height than the 14, 16 and 18 mm formats. It is therefore suitable for restorations whose vertical dimensions require additional space before sintering.
This additional height can also be beneficial when managing the shade gradient. Restoration positioning can be adjusted between the different regions of the disc to achieve the desired distribution of cervical, dentine and incisal shades.
Developed as an evolution of the CopraSupreme Symphony range, CopraSupreme ML PRO is a pre-shaded zirconia suitable for fully contoured restorations, stained restorations and frameworks intended for cut-back techniques or ceramic veneering.
The 20 mm disc is therefore an option for laboratories seeking to combine increased milling height, prosthetic versatility and controlled aesthetic shade distribution, while respecting the specific design requirements of each restoration.
TOSOH: A Leading Raw Material Supplier for Dental Zirconia
The final characteristics of a zirconia restoration depend on several factors, including the quality and composition of the powders used and the manufacturing processes applied to the pre-sintered disc.
TOSOH Corporation is a Japanese company specialising in advanced technical materials, including zirconia powders developed for industrial and dental applications.
Raw material purity, particle size distribution and compositional homogeneity influence the densification process during sintering.
These parameters contribute to the consistency of the ceramic material's mechanical and optical properties after thermal processing.
Combining TOSOH Raw Materials with Whitepeaks Manufacturing
Whitepeaks specifies the use of 100% TOSOH zirconia powders in the manufacturing of CopraSupreme ML PRO.
Whitepeaks processes the raw material using an isostatic pressing technique designed to promote uniform material distribution throughout the disc.
For a pre-sintered zirconia blank with a 20 mm thickness, manufacturing consistency is an important factor affecting milling operations and material behaviour during sintering.
This combination of TOSOH raw materials and Whitepeaks manufacturing expertise provides a zirconia material with clearly identified origins and technical characteristics.
Indications for Dental Prosthetic Restorations
The 20 mm CopraSupreme ML PRO can be used for various fixed prosthodontic applications. Selecting this thickness depends on the dimensions of the restoration before sintering and its specific design requirements.
- Zirconia veneers.
- Inlays and onlays.
- Monolithic anterior crowns.
- Monolithic posterior crowns.
- Anterior and posterior bridges.
- Long-span bridges, according to the manufacturer's indications.
- Implant-supported restorations and suitable frameworks.
- Frameworks intended for ceramic veneering.
Whitepeaks specifies indications for restorations of up to 14 units. This remains subject to the restoration geometry, minimum wall thicknesses and connector cross-sections required by the manufacturer.
The 20 mm disc thickness must also provide sufficient space to accommodate the restoration in its intended milling orientation, taking the material's shrinkage factor into account.
Key Benefits for Dental Laboratories
- 20 mm disc thickness: additional vertical space for positioning CAD/CAM restorations.
- Mechanical strength: designed for single-unit and multi-unit restorations according to the manufacturer's indications.
- Multilayer aesthetics: gradual shade transitions between cervical and incisal regions.
- Wide shade selection: shades A1 to D4 and 0M1 to 0M3.
- CAD/CAM versatility: suitable for anterior and posterior restorations.
- Sintering protocols: standard and accelerated cycles depending on the restorations and equipment used.
- Identified raw material: manufactured using TOSOH zirconia powders.
- Isostatic pressing: a manufacturing process designed to promote material homogeneity.
Smart Gradient Technology: Five Layers for Natural Shade Transitions
Whitepeaks' Smart Gradient technology features a multilayer structure designed to reproduce natural aesthetic transitions between the different regions of a dental restoration.
CopraSupreme ML PRO consists of five main layers combined with four transition zones. This structure helps minimise distinct boundaries between shades.
For the 20 mm disc, each of the five main layers nominally represents 20% of the total disc height, equivalent to 4 mm.
This distribution is an important factor when positioning restorations during CAD/CAM nesting. Dental technicians can adjust the height and orientation of a restoration to make effective use of the shade regions required for the desired aesthetic result.
Distribution of the Five Layers
- Enamel 1: 20% of the disc height, equivalent to 4 mm.
- Enamel 2: 20% of the disc height, equivalent to 4 mm.
- Dentin 1: 20% of the disc height, equivalent to 4 mm.
- Dentin 2: 20% of the disc height, equivalent to 4 mm.
- Margin: 20% of the disc height, equivalent to 4 mm.
These dimensions correspond to the nominal layer distribution shown in the Whitepeaks diagram for a 20 mm disc.
Positioning CAD/CAM Restorations Within the Blank
The 20 mm disc height provides additional flexibility when positioning restorations vertically, taking their anatomy and the shade gradient into account.
For an anterior crown, the laboratory may choose a position that incorporates a greater proportion of the incisal regions in the upper part of the restoration.
For other restoration designs, the position can be adjusted to favour the dentine or cervical regions.
However, the available disc height must be assessed according to the actual dimensions of the restoration before sintering.
Final positioning depends on the CAM software, the material shrinkage factor and the milling requirements of the system used.
Layer Distribution According to Disc Thickness
| Disc Thickness | Each Main Layer: 20% |
|---|---|
| 12 mm | 2.4 mm |
| 14 mm | 2.8 mm |
| 16 mm | 3.2 mm |
| 18 mm | 3.6 mm |
| 20 mm – Featured Version | 4.0 mm |
| 25 mm | 5.0 mm |
| 30 mm | 6.0 mm |
The 20 mm CopraSupreme ML PRO disc features five main layers, each with a nominal height of 4 mm according to the Smart Gradient distribution. The final aesthetic result also depends on restoration orientation, final restoration thickness and the sintering cycle. These values describe the layer heights within the disc and must not be confused with the required thickness of finished restorations.
Applications: Anterior and Posterior Dental Restorations
Combining mechanical strength and translucency, CopraSupreme ML PRO meets the requirements of various prosthetic restorations manufactured using digital milling technology.
The 20 mm version can be particularly relevant when the restoration requires additional material height along the vertical axis of the zirconia disc.
It can accommodate both monolithic crowns and multi-unit frameworks, provided that the manufacturer's indications and the design requirements of each restoration are respected.
Whitepeaks CopraSupreme ML PRO Technical Specifications
| Manufacturer | Whitepeaks Dental Solutions – Germany |
|---|---|
| Product Range | CopraSupreme ML PRO |
| Material | Pre-sintered multilayer ZrO₂ zirconia |
| Disc Thickness | 20 mm |
| Disc Diameter | 98 mm |
| Generation | 5th generation – 100% TOSOH raw material |
| Technology | Smart Gradient – 5 main layers and 4 transition zones |
| Nominal Height of Each Layer | 4 mm for the 20 mm disc |
| Flexural Strength | Approximately 1,200 MPa |
| Translucency | Up to 45% |
| Density After Sintering | Approximately 6.07 g/cm³ |
| Vickers Hardness | Approximately 1,250 HV10 |
| Coefficient of Thermal Expansion | 10.7 ± 0.5 × 10-6/K, between 25 and 500°C |
| Chemical Solubility | ≤ 100 µg/cm² |
| ZrO₂ + HfO₂ Content | 91.42–92.99% |
| Y₂O₃ Content | 6.58–6.97% |
| Available Shades | A1 to D4 and 0M1, 0M2, 0M3 |
| Available Diameters | 98 mm |
| Available Thicknesses | 12, 14, 16, 18, 20, 25 and 30 mm |
| Standard Sintering Temperature | 1,500–1,550°C, according to the Whitepeaks sintering programme |
| Fast Sintering | From approximately 2 hours, for restorations up to 3 units |
| Ultra-Fast Sintering | From approximately 60 minutes, for restorations up to 3 units, under vacuum using the Ivoclar Programat CS6 |
| Standard | EN ISO 6872 – Type II, Class 5 |
| Medical Device Classification | Class IIa medical device |
| Manufacturing Process | Isostatic pressing |
| Manufacturer's Warranty | Lifetime warranty as stated by Whitepeaks, subject to its terms and conditions |
The specified mechanical and optical properties refer to the material after sintering under the conditions recommended by Whitepeaks. Final properties depend on factors including the thermal cycle, restoration design and finishing procedures. The 20 mm dimension refers to the height of the pre-sintered disc and must not be confused with the final thickness of the restorations.
Sintering Protocols: Standard, Fast and Ultra-Fast
After CAD/CAM milling, restorations manufactured from CopraSupreme ML PRO zirconia must undergo a sintering cycle appropriate to their geometry and the furnace used.
Whitepeaks provides several thermal processing options for this material.
- Standard sintering: final temperature between 1,500 and 1,550°C, with a holding time of 120 minutes.
- Fast sintering: approximately 2-hour cycle for certain restorations of up to 3 units.
- Ultra-fast sintering: from approximately 60 minutes under vacuum using the Ivoclar Programat CS6, for certain restorations of up to 3 units.
The selected programme must take into account restoration size, volume, geometry and the capabilities of the sintering furnace.
The initial 20 mm disc thickness does not determine the sintering time by itself. The characteristics of the milled restorations must be considered when selecting the appropriate cycle.
Important: accelerated sintering cycles may result in reduced mechanical strength compared with standard processing. The relevant Whitepeaks sintering protocols must be followed for each restoration type.
Technical Recommendations for Dental Laboratories
When working with a 20 mm multilayer zirconia disc, several parameters should be checked during CAD/CAM preparation and finishing procedures.
- Check that the 98 mm zirconia disc is compatible with the CAD/CAM milling system and its holding fixture.
- Ensure that the milling machine can accommodate a 20 mm disc thickness.
- Observe the shrinkage factor specified for the zirconia blank.
- Check the vertical dimensions of the restorations before milling.
- Adjust restoration positioning according to the different Smart Gradient layers.
- Maintain the required minimum wall thicknesses after sintering.
- Respect the recommended connector cross-sections for bridges.
- Avoid excessive pressure when finishing the material in its pre-sintered state.
- Thoroughly remove milling dust and debris.
- Ensure that the restorations are completely dry before placing them in the sintering furnace.
- After sintering, use suitable diamond instruments with appropriate cooling.
The appropriate zirconia disc thickness should be selected before preparing the milling job, according to the restoration dimensions and the requirements of the CAD/CAM system.
Recommended Complementary Products
Delivery and Packaging
Package contents: 1 Whitepeaks CopraSupreme ML PRO multilayer zirconia disc, 98 mm diameter and 20 mm thickness, supplied in the shade selected when placing the order.
FAQ – Whitepeaks CopraSupreme ML PRO
What is the difference between CopraSupreme ML PRO and a single-layer zirconia disc?
CopraSupreme ML PRO features a multilayer structure incorporating several shade regions within the same pre-sintered zirconia disc.
Unlike single-layer zirconia, which maintains a uniform shade throughout the material, it provides a gradual transition between cervical, dentine and incisal regions.
This technology, known as Smart Gradient, consists of five main layers and four transition zones designed to minimise visible boundaries between different shades.
In the 20 mm disc, each main layer has a nominal height of 4 mm. This distribution allows the laboratory to adjust the vertical positioning of restorations according to the desired aesthetic characteristics.
The multilayer structure facilitates the production of monolithic restorations with an integrated shade gradient while retaining the possibility of additional staining and characterisation.
Can full-arch bridges be manufactured using this zirconia?
Whitepeaks specifies indications for multi-unit restorations of up to 14 units using CopraSupreme ML PRO, provided that the manufacturer's recommendations are followed.
The 20 mm disc provides greater milling height than the 16 and 18 mm versions. However, this additional height does not automatically guarantee that a full-arch bridge can be manufactured.
The laboratory must ensure that the entire restoration can be positioned within the available disc volume before sintering, taking into account the shrinkage factor and selected orientation.
The design must also comply with minimum connector dimensions, material thickness requirements and the mechanical demands of the restoration.
Selecting the correct disc thickness is therefore one of several CAD/CAM preparation factors involved in manufacturing long-span bridges.
What is the flexural strength of CopraSupreme ML PRO?
Whitepeaks specifies a flexural strength of approximately 1,200 MPa for CopraSupreme ML PRO after sintering under the processing conditions recommended by the manufacturer.
This characteristic makes the material suitable for various anterior and posterior restorations, including crowns and certain multi-unit prosthetic constructions.
However, the specified flexural strength is a material property and should not be interpreted as the actual strength of a finished restoration.
Mechanical performance also depends on prosthetic geometry, final zirconia thickness, connector dimensions and finishing procedures.
The thermal processing programme is another important factor. Accelerated sintering cycles may alter the mechanical properties compared with standard sintering.
The 20 mm version retains the specified characteristics of the CopraSupreme ML PRO range, provided that Whitepeaks' processing requirements are followed.
Which shades and disc thicknesses are available?
The Whitepeaks CopraSupreme ML PRO range includes conventional shades A1 to D4, together with shades 0M1, 0M2 and 0M3.
The available thicknesses are 12, 14, 16, 18, 20, 25 and 30 mm. Disc diameters of 95 and 98 mm are also available, depending on the CAD/CAM holding system.
This product description specifically refers to the 98 mm diameter, 20 mm thick zirconia disc.
The 20 mm format can be selected when the restorations to be milled require more vertical space than thinner discs can provide.
The choice should take into account restoration anatomy, milling orientation and the disc's shrinkage factor.
For this thickness, each of the five main Smart Gradient layers has a nominal height of 4 mm.
Which sintering programme should be used?
The standard sintering programme specified by Whitepeaks for CopraSupreme ML PRO includes a final temperature between 1,500 and 1,550°C, with a holding time of 120 minutes.
The manufacturer also provides fast sintering protocols for certain restorations of up to three units, with cycles lasting approximately two hours.
An ultra-fast programme starting from approximately 60 minutes is also specified for certain restorations of up to three units, under vacuum using the Ivoclar Programat CS6 furnace.
It is important to distinguish the thickness of the disc before milling from the actual dimensions of the restorations being sintered.
The initial 20 mm disc height does not mean that every restoration manufactured from this blank requires the same thermal processing programme.
The selected cycle must follow Whitepeaks' instructions and take into account the furnace used, restoration geometry and restoration volume.
Can CopraSupreme ML PRO be veneered with dental ceramics?
Yes. CopraSupreme ML PRO can be used to manufacture monolithic restorations, stained restorations and frameworks intended for ceramic veneering.
Smart Gradient technology provides a shade transition integrated directly into the material. Dental technicians can therefore choose a fully contoured restoration or use a cut-back technique to apply veneering ceramic to selected areas.
This option can be particularly useful for anterior restorations requiring more detailed aesthetic characterisation.
The 20 mm disc provides sufficient material height for various restoration configurations, within the dimensional limitations of the milling job.
For veneered restorations, compatible zirconia veneering ceramics must be used, and the firing programmes recommended by the ceramic manufacturer must be followed.
Whitepeaks CopraSupreme ML PRO: Versatile Zirconia for CAD/CAM Dental Laboratories
The Whitepeaks CopraSupreme ML PRO 20 mm is designed for dental laboratories seeking a multilayer zirconia disc with sufficient material height for restorations requiring additional vertical space during CAD/CAM preparation.
Its 98 mm diameter, Smart Gradient technology featuring five main 4 mm layers and specified flexural strength of approximately 1,200 MPa after sintering make it suitable for various prosthetic applications.
The combination of TOSOH zirconia powders, isostatic pressing and the optical properties of the CopraSupreme ML PRO range provides a technical foundation for manufacturing zirconia crowns, bridges and frameworks.
For restorations requiring a 20 mm zirconia disc, this CopraSupreme ML PRO version combines the positioning flexibility provided by the increased disc height with the aesthetic versatility and mechanical properties of Whitepeaks zirconia.