TOSOH Zirconia Disc 18 mm Whitepeaks CopraSupreme ML PRO – Smart Gradient
Référence: 102111981800
```html

Whitepeaks CopraSupreme ML PRO Zirconia Disc – High-Strength Smart Gradient Multilayer Zirconia
The Whitepeaks CopraSupreme ML PRO is a 5th-generation multilayer zirconia disc designed for CAD/CAM milling of anterior and posterior dental restorations.
Combining a flexural strength of approximately 1,200 MPa with translucency of up to 45%, this zirconia material is suitable for manufacturing crowns, bridges and aesthetic monolithic restorations.
Its advanced Smart Gradient technology provides a gradual transition between cervical, dentine and incisal regions, minimising visible boundaries between layers.
Manufactured from TOSOH zirconia powders using an isostatic pressing process, CopraSupreme ML PRO meets the requirements of dental laboratories seeking natural aesthetics, high mechanical strength and consistent manufacturing results.
CopraSupreme ML PRO: Multilayer Zirconia for Demanding Dental Restorations
Developed as an evolution of the CopraSupreme Symphony range, CopraSupreme ML PRO combines high mechanical strength with a natural shade gradient to meet the requirements of modern prosthetic restorations.
This pre-shaded zirconia is suitable for fully contoured restorations as well as frameworks intended for staining, cut-back techniques or ceramic veneering.
Its multilayer structure allows dental technicians to optimise the positioning of restorations within the CAD/CAM blank, achieving the desired distribution of shades between the cervical and incisal regions.
TOSOH: A Leading Raw Material Supplier for Dental Zirconia
TOSOH Corporation is a recognised Japanese manufacturer specialising in advanced zirconia powders, including materials developed for dental applications.
The final properties of zirconia depend partly on raw material purity, particle size distribution and compositional homogeneity. These parameters influence densification during sintering and contribute to the mechanical and optical characteristics of the finished material.
Combining TOSOH Raw Materials with Whitepeaks Manufacturing
For CopraSupreme ML PRO, Whitepeaks specifies the use of 100% TOSOH zirconia powders combined with an isostatic pressing process.
TOSOH supplies the raw material, while Whitepeaks manufactures the multilayer zirconia disc. This combination provides a zirconia material with clearly identified powder origins and technical characteristics.
Indications for Dental Prosthetic Restorations
- Zirconia veneers.
- Inlays and onlays.
- Monolithic anterior crowns.
- Monolithic posterior crowns.
- Anterior and posterior bridges.
- Long-span bridges, according to the manufacturer's indications.
- Implant-supported restorations and suitable frameworks.
- Frameworks intended for ceramic veneering.
Whitepeaks specifies indications for restorations of up to 14 units, provided that the minimum wall thicknesses, connector cross-sections and design requirements established by the manufacturer are respected.
Key Benefits for Dental Laboratories
- High mechanical strength: suitable for single-unit and multi-unit restorations.
- Multilayer aesthetics: smooth shade transitions between dentine and incisal regions.
- Wide shade selection: shades A1 to D4 and 0M1 to 0M3.
- CAD/CAM versatility: anterior and posterior restorations.
- Sintering flexibility: standard and accelerated sintering programmes depending on the equipment used.
- Identified raw material: manufactured using TOSOH zirconia powders.
- Isostatic pressing: a manufacturing process designed to promote disc homogeneity.
Smart Gradient Technology: Five Layers for Natural Shade Transitions
Smart Gradient technology features 5 main layers, each representing 20% of the disc height, together with 4 transition zones.
This structure promotes a gradual shade transition from the cervical to the incisal region while minimising visible differences between individual layers.
Distribution of the Five Layers
- Enamel 1: 20% of the disc height.
- Enamel 2: 20% of the disc height.
- Dentin 1: 20% of the disc height.
- Dentin 2: 20% of the disc height.
- Margin: 20% of the disc height.
Positioning CAD/CAM Restorations Within the Blank
The vertical positioning of a restoration within the zirconia disc influences the final shade distribution after sintering.
Dental technicians should consider the restoration height, the desired incisal appearance and the required cervical shade.
Correct positioning allows the multilayer gradient to be used effectively to achieve the intended aesthetic result.
Layer Distribution According to Disc Thickness
| Disc Thickness | Each Main Layer: 20% |
|---|---|
| 12 mm | 2.4 mm |
| 14 mm | 2.8 mm |
| 16 mm | 3.2 mm |
| 18 mm | 3.6 mm |
| 20 mm | 4.0 mm |
| 25 mm | 5.0 mm |
| 30 mm | 6.0 mm |
These values represent the nominal distribution of the five main layers illustrated in the Whitepeaks diagram. The final aesthetic appearance also depends on CAD/CAM positioning, restoration thickness and the sintering protocol used.
Applications: Anterior and Posterior Dental Restorations
CopraSupreme ML PRO can be used to manufacture a wide range of prosthetic restorations, from single-unit restorations to long-span bridges, in accordance with the manufacturer's indications.
Whitepeaks CopraSupreme ML PRO Technical Specifications
| Manufacturer | Whitepeaks Dental Solutions – Germany |
|---|---|
| Product Range | CopraSupreme ML PRO |
| Material | Pre-sintered multilayer ZrO₂ zirconia |
| Generation | 5th generation – 100% TOSOH raw material |
| Technology | Smart Gradient – 5 main layers and 4 transition zones |
| Flexural Strength | Approximately 1,200 MPa |
| Translucency | Up to 45% |
| Density After Sintering | Approximately 6.07 g/cm³ |
| Vickers Hardness | Approximately 1,250 HV10 |
| Coefficient of Thermal Expansion | 10.7 ± 0.5 × 10-6/K, between 25 and 500°C |
| Chemical Solubility | ≤ 100 µg/cm² |
| ZrO₂ + HfO₂ Content | 91.42–92.99% |
| Y₂O₃ Content | 6.58–6.97% |
| Available Shades | A1 to D4 and 0M1, 0M2, 0M3 |
| Available Diameters | 95 mm and 98 mm, depending on the milling system |
| Available Thicknesses | 12, 14, 16, 18, 20, 25 and 30 mm |
| Standard Sintering Temperature | 1,500–1,550°C, according to the Whitepeaks sintering programme |
| Fast Sintering | From approximately 2 hours, for restorations up to 3 units |
| Ultra-Fast Sintering | From approximately 60 minutes, for restorations up to 3 units, under vacuum using the Ivoclar Programat CS6 |
| Standard | EN ISO 6872 – Type II, Class 5 |
| Medical Device Classification | Class IIa medical device |
| Manufacturing Process | Isostatic pressing |
| Manufacturer's Warranty | Lifetime warranty as stated by Whitepeaks, subject to its terms and conditions |
Mechanical properties are specified for the material after sintering under the conditions recommended by the manufacturer. Results may vary depending on the sintering cycle used, particularly with accelerated sintering protocols.
Sintering Protocols: Standard, Fast and Ultra-Fast
CopraSupreme ML PRO offers several sintering protocols depending on the furnace used and the characteristics of the restoration.
- Standard sintering: final temperature of 1,500–1,550°C with a holding time of 120 minutes.
- Fast sintering: approximately 2-hour cycle for restorations up to 3 units.
- Ultra-fast sintering: from 60 minutes under vacuum using the Ivoclar Programat CS6, for restorations up to 3 units.
Important: accelerated sintering cycles may reduce mechanical strength. The sintering programme must be adapted to the furnace, restoration volume and geometry, in accordance with Whitepeaks recommendations.
Technical Recommendations for Dental Laboratories
- Check that the zirconia disc is compatible with the CAD/CAM milling system and its holding fixture.
- Observe the shrinkage factor specified for the zirconia blank.
- Maintain the minimum required wall thicknesses after sintering.
- Respect the recommended connector cross-sections for bridges.
- Avoid excessive pressure when finishing the material in its pre-sintered state.
- Thoroughly remove milling dust and debris.
- Ensure the restoration is completely dry before placing it in the sintering furnace.
- After sintering, use suitable diamond instruments with appropriate cooling.
Recommended Complementary Products
Delivery and Packaging
Package contents: 1 Whitepeaks CopraSupreme ML PRO multilayer zirconia disc, 98 x 18 mm and shade selected when placing the order.
FAQ – Whitepeaks CopraSupreme ML PRO
What is the difference between CopraSupreme ML PRO and a single-layer zirconia disc?
CopraSupreme ML PRO features five main layers and four transition zones. Unlike single-layer zirconia with a uniform shade throughout the blank, it incorporates a cervical-to-incisal shade gradient directly into the disc.
This structure provides a gradual transition between shades and facilitates the production of aesthetic monolithic restorations.
Can CopraSupreme ML PRO be used for full-arch bridges?
Whitepeaks indicates that CopraSupreme ML PRO can be used for restorations of up to 14 units, provided that the manufacturer's instructions are followed.
For long-span bridges, particular attention must be paid to connector dimensions, minimum wall thicknesses, framework geometry and the mechanical requirements of the individual clinical case.
What is the flexural strength of CopraSupreme ML PRO?
The specified flexural strength is approximately 1,200 MPa after sintering, under the processing conditions recommended by Whitepeaks.
This value may vary depending on the thermal processing protocol. Accelerated sintering cycles may result in reduced mechanical performance.
Which shades and disc thicknesses are available?
The range includes conventional A1 to D4 shades as well as 0M1, 0M2 and 0M3.
Available disc thicknesses range from 12 to 30 mm. The 95 mm and 98 mm diameters provide compatibility with different CAD/CAM holding systems, depending on the available product variants.
Which sintering programme should be used?
The standard sintering programme specifies a final temperature between 1,500 and 1,550°C.
Fast and ultra-fast sintering cycles are available for certain restorations of up to 3 units when using compatible equipment. The selected programme must always comply with the Whitepeaks instructions applicable to the furnace and restoration type.
Can CopraSupreme ML PRO be veneered with dental ceramics?
Yes. CopraSupreme ML PRO is suitable for monolithic restorations, stained and glazed restorations, and frameworks intended for ceramic veneering.
For veneered restorations, compatible zirconia veneering ceramics must be used, and the firing parameters recommended by the ceramic manufacturer must be followed.
Whitepeaks CopraSupreme ML PRO: Versatile Zirconia for CAD/CAM Dental Laboratories
Whitepeaks CopraSupreme ML PRO combines high mechanical strength, translucency suitable for aesthetic restorations and a natural multilayer shade gradient achieved through Smart Gradient technology.
Its versatility, wide shade selection and range of sintering protocols make it a suitable solution for dental laboratories manufacturing single-unit and multi-unit CAD/CAM restorations, in both anterior and posterior regions.
```