Vita Vionic Bond-Bi-component adhesive for dental prostheses
Référence: H02235
VITA VIONIC BOND, two-component bonding agent for digital denture workflows
VITA VIONIC BOND is a self-curing two-component bonding agent developed for the permanent bonding of prosthetic teeth into digital denture bases. Its MMA-based formulation, low viscosity and ability to create a reactive interfacial layer make it particularly suitable for CAD/CAM removable prosthetic workflows, whether the laboratory is working with milled teeth or prefabricated teeth from the VITA VIONIC range.
For the dental laboratory, the benefits are clear: precise bonding, minimal film thickness, clean positioning of the teeth inside their sockets and a smoother workflow for finishing the digital removable denture.
Self-curing two-component MMA bonding agent
Permanent bonding of teeth to denture base
2 ml + 1 ml + 3 microbrushes + mixing dish
Approx. 28 prosthetic teeth per kit
A bonding system designed for digital removable prosthetics in the dental laboratory
In a modern digital removable denture workflow, the bonding stage of the prosthetic teeth plays a decisive role in assembly accuracy, occlusal stability and overall reliability of the final prosthesis.
VITA VIONIC BOND addresses this requirement with a clean, fast and reproducible application method, tailored for laboratories working with CAD/CAM denture production, whether on milled denture bases or on compatible 3D printed bases.
Why choose VITA VIONIC BOND?
- Reliable chemical bonding between denture teeth and denture base.
- Low viscosity for precise application on bonding surfaces.
- Minimal film thickness for accurate seating without unnecessary spacing.
- Self-curing system without a complex firing cycle.
- Clean and efficient workflow for the dental laboratory.
Laboratory advantages
- Suitable for VITA VIONIC VIGO teeth and teeth milled from VITA VIONIC DENT DISC multiColor.
- Compatible with VITA VIONIC BASE DISC HI denture bases and with various VITA-validated 3D printed denture bases.
- Working time of approximately 10 minutes at 21 °C for controlled tooth positioning.
- Practical kit packaging for occasional use or small-batch laboratory production.
Applications and indications in the dental laboratory
VITA VIONIC BOND is indicated for the permanent bonding of VITA VIONIC denture teeth into the corresponding cavities of denture bases manufactured from compatible base materials. It integrates particularly well into the following indications:
- full removable dentures produced through a digital CAD/CAM workflow,
- digital partial dentures with laboratory-prepared teeth,
- bonding of prefabricated VITA VIONIC VIGO teeth,
- bonding of milled tooth elements made from VITA VIONIC DENT DISC multiColor,
- assembly on milled VITA VIONIC BASE DISC HI bases,
- selected workflows involving VITA-approved 3D printed denture bases.
Why is a dedicated digital denture bonding system preferable to a generic adhesive?
In a digital removable denture workflow, the fit tolerances between the tooth and the base cavity are far more critical than in a conventional denture set-up.
An adhesive that is too thick, too slow or poorly matched to the substrate combination may create an interfacial gap, compromise the final seating of the tooth or require occlusal corrections.
With VITA VIONIC BOND, the laboratory benefits from a bonding system developed for the VITA VIONIC family, with performance better aligned with the milling / bonding / finishing workflow logic.
It is therefore a particularly consistent choice when reproducibility is a priority in digital removable prosthetics.
Material compatibility
The system is intended for acrylate-based materials such as PMMA and acrylate-based composites. VITA specifically documents its use with:
- VITA VIONIC VIGO,
- VITA VIONIC DENT DISC multiColor,
- VITA VIONIC BASE DISC HI,
- and various VITA-validated 3D printed denture bases.
Please note: this product is not intended for bonding prefabricated teeth outside the VITA VIONIC system or for teeth whose external contour does not match the designed socket geometry.
Recommended instructions for use
- Check the precise fit of the teeth in the denture base cavities.
- Work on dry, clean surfaces free of dust, grease, wax and contaminants.
- Mix VIONIC BOND I and VIONIC BOND II.
- Stir for approximately 30 seconds.
- Apply the mixture to the bonding surfaces and generously wet the cavities.
- Insert the teeth and position them carefully.
- Allow the assembly to rest for approximately 30 minutes.
- Complete the process according to your laboratory protocol, for example in a pressure pot if included in your workflow.
Technical specifications
| Specification | Detail |
|---|---|
| Product name | VITA VIONIC BOND |
| Brand | VITA |
| SKU | H02235 |
| Type | Self-curing two-component bonding agent |
| Chemical base | MMA / methyl methacrylate |
| Consistency | Low viscosity for precise application |
| Working time | Approx. 10 minutes at 21 °C |
| Kit contents | 1 bottle BOND I 2 ml + 1 bottle BOND II 1 ml + 3 microbrushes + 1 mixing dish |
| Yield | Approx. 28 prosthetic teeth |
| Recommended storage | Refrigerated between 5 °C and 10 °C, protected from direct sunlight |
| After opening | Recommended use within 90 days if stored correctly |
| Intended users | Dental professionals only |
Practical benefits for the dental technician
- Clean tooth positioning thanks to controlled flow behavior.
- Time-saving within the digital denture workflow.
- Less rework when the initial fit has been properly prepared.
- Excellent system logic for laboratories already working within the VITA VIONIC environment.
Precautions for use
- Do not use in patients with MMA sensitivity.
- Do not use for teeth outside the intended VITA VIONIC system.
- Stop using the mixture if it starts to gel or string.
- Follow the product safety instructions and proper laboratory ventilation requirements.
Laboratory tip
To secure predictable bonding in a digital removable denture workflow, always prepare the sockets meticulously and perform a dry try-in before mixing the adhesive.
With this type of bonding system, the quality of the final result depends just as much on material compatibility as on fit accuracy.
Thorough preparation significantly reduces finishing adjustments and occlusal corrections.
Demonstration video
Documents & resources
General presentation, indications and kit contents.
Overview of the VITA digital removable prosthetic workflow.
Consult the official instructions for use and safety documents on the VITA eIFU platform.
Delivery
Delivery: 1 VITA VIONIC BOND kit including 1 bottle of VIONIC BOND I 2 ml, 1 bottle of VIONIC BOND II 1 ml, 3 applicator microbrushes and 1 mixing dish.
FAQ – VITA VIONIC BOND
What exactly is VITA VIONIC BOND used for in the dental laboratory?
VITA VIONIC BOND is used for the permanent bonding of prosthetic teeth into digital removable denture bases.
It has been developed for CAD/CAM removable prosthetic workflows, especially with VITA VIONIC VIGO teeth or tooth elements milled from VITA VIONIC DENT DISC multiColor.
Its main benefit is to provide a clean, stable and accurate bond between the tooth and the base, with a more reproducible protocol for the dental laboratory.
Does the bonding process require firing or a heavy thermal cycle?
No, the system is self-curing.
This simplifies the workflow compared with more demanding procedures and speeds up the assembly phase in the laboratory.
Depending on the chosen protocol, the lab may subsequently complete the setting phase under pressure if that is part of its internal process.
The main advantage is greater efficiency while maintaining accurate bonding.
What is the working time of the mixture?
At an ambient temperature of approximately 21 °C, the working time is around 10 minutes.
This gives enough time to apply the bonding agent, position the teeth and adjust insertion into the designed sockets.
If the mixture begins to gel or form strings, application should be stopped and a fresh mix prepared.
Which materials is VITA VIONIC BOND compatible with?
VITA indicates compatibility with acrylate-based materials, especially PMMA and acrylic composites used within the VITA VIONIC system.
The product is documented for VITA VIONIC VIGO teeth, tooth elements produced from VITA VIONIC DENT DISC multiColor and VITA VIONIC BASE DISC HI denture bases.
The manufacturer also mentions validation with selected competing 3D printed denture base materials.
How should the kit be stored correctly?
The manufacturer recommends storage in a refrigerator between 5 °C and 10 °C, with the bottles tightly closed and protected from direct sunlight.
After opening, use is recommended within 90 days if storage conditions are respected.
This precaution helps maintain product consistency and long-term bonding reliability.
Vita Vionic Bond-Bi-component adhesive for dental prostheses