A printer that is not listed or a non-validated material file may compromise final properties.
VarseoSmile TriniQ BEGO definitive dental 3D resin
Earn 329 loyalty points
Référence: 41180
European delivery depending on destination
Secure payment by credit or debit card
Secure payment with PayPal
PayPal may offer Pay in 3 if the customer and purchase are eligible
Credit / debit card
PayPal
Bank transfer
* Instalment payment may be offered by PayPal subject to customer and purchase eligibility. Available options may vary depending on the PayPal account.
Brand: BEGO VarseoSmile TriniQ Definitive material Ceramic-filled hybrid SLA / DLP / LCD 385–405 nm 10 VITA shades
VarseoSmile TriniQ BEGO – definitive dental 3D resin for aesthetic restorations
VarseoSmile TriniQ is a ceramic-filled hybrid material developed by BEGO for the 3D printing of definitive and temporary dental restorations.
Its positioning is particularly strong: this is not a simple provisional resin or try-in material, but a material indicated for definitive restorations, including crowns, inlays, onlays, table tops, veneers and definitive 3-unit bridges according to the manufacturer’s indications.
In the dental 3D printing market, materials with an indication for definitive restorations remain relatively uncommon. VarseoSmile TriniQ belongs to this highly sought-after category for laboratories and practices wishing to produce aesthetic, functional and reproducible restorations with a validated digital workflow.
Key indication Definitive restorations
Applications Crowns, bridges, veneers
Shades 10 VITA shades
Technology 385–405 nm 3D printing
A definitive BEGO resin designed to expand the scope of dental 3D printing
VarseoSmile TriniQ was designed to meet a strong demand in the dental sector: printing restorations that are more versatile, more aesthetic and suitable for more demanding clinical indications than conventional provisional resins.
The material combines an acrylate-based resin matrix with a ceramic filler, in order to achieve a balance between strength, aesthetics, polishability, colour stability and functional comfort for the patient.
For laboratories or practices equipped for dental 3D printing, it helps rationalise material inventory: a single resin covers a wide spectrum of indications, from single-unit definitive restorations to long-span provisional bridges, as well as printed prosthetic teeth.
The key strength: an indication as a definitive material
One of the most important arguments for VarseoSmile TriniQ is its status as a material intended for definitive restorations. This approval is a major differentiating factor, as most printable dental resins are still positioned for models, guides, splints, provisionals or indirect applications.
With VarseoSmile TriniQ, the laboratory or practice can integrate 3D printing into the production of final prosthetic restorations, provided the validated workflow is strictly followed: compatible printer, material parameters, cleaning, drying, post-curing and finishing.
Definitive single-unit restorations
Crowns, inlays, onlays, table tops and veneers according to the manufacturer’s indications and protocols.
Definitive 3-unit bridges
The material stability enables reliable production of definitive bridges up to three units according to BEGO indications.
A highly selective market
Printable materials with definitive indications remain much rarer than provisional or technical resins.
The definitive indication never replaces strict compliance with the manufacturer’s instructions, validated printers, printing parameters and post-processing protocol.
Main indications
VarseoSmile TriniQ covers a wide range of prosthetic indications in dental 3D printing.
- Definitive single crowns.
- Inlays.
- Onlays.
- Table tops.
- Prosthetic veneers.
- Definitive 3-unit bridges.
- Veneering on metal frameworks.
- Long-span temporary restorations.
- Temporary bridges up to 7 segments according to protocol.
- Printed prosthetic teeth.
For which professionals?
This resin is intended for organisations that want to go beyond 3D printing models or guides and integrate more advanced restorative production.
- Digital dental laboratories.
- Dental practices equipped with validated 3D printing.
- Clinics with an in-house CAD/CAM workflow.
- Prosthetic production centres.
- Structures looking for an aesthetic and fast alternative for printed restorations.
- Laboratories wishing to reduce the number of different resins in stock.
“One for all”: one resin for several restoration families
BEGO positions VarseoSmile TriniQ as a versatile material capable of covering multiple prosthetic needs. This “one for all” logic is very relevant in practice, as it simplifies laboratory organisation: fewer material changes, fewer references to manage and a more consistent workflow.
Definitive
Crowns, 3-unit bridges, inlays, onlays, table tops and veneers.
Temporary
Temporary restorations and extended temporary bridges according to manufacturer indications.
Prosthetics
Printed prosthetic teeth to broaden the field of use in removable prosthetics.
 |
 |
 |
 |
10 VITA shades for natural integration
VarseoSmile TriniQ is available in 10 VITA shades to cover the most common aesthetic needs in printed dental restorations.
The availability of several shades makes it possible to adapt the restoration to the clinical situation, natural dentition and aesthetic requirements of the case.
| A1 — Common shade | A2 — Common shade |
| A3 — Common shade | A3.5 — Warm shade |
| B1 — Light shade | B2 — Natural shade |
| C2 — Greyish shade | D3 — Natural shade |
| OM1 — Bleach shade | OM3 — Bleach shade |
Translucency, gloss and polishing
BEGO highlights the translucency, polishability and aesthetic integration of VarseoSmile TriniQ. These points are essential for a printed restoration, because the final appearance depends on the shade, post-processing, finishing and polishing.
The material is designed to produce aesthetic restorations with a reproducible digital protocol, while allowing mechanical finishing suited to laboratory requirements.
- Natural appearance according to the selected shade.
- Good polishability.
- Translucency suited to aesthetic restorations.
- Colour stability highlighted by BEGO.
- Final result dependent on compliance with the complete protocol.
Functional behaviour and intraoral comfort
VarseoSmile TriniQ is designed to provide a combination of strength, aesthetics and functional behaviour. BEGO highlights wear behaviour close to lithium disilicate, with a material that is gentle on antagonists.
Controlled wear
An interesting functional behaviour for restorations in both anterior and posterior areas.
Gentle on antagonists
The material is presented as respectful of the antagonist dentition in its intended use.
Repair possible
Additions and repairs can be performed with common composites according to an adapted protocol.
Secure placement with adhesive cements
VarseoSmile TriniQ is intended to be luted with common adhesive cements, according to the manufacturer’s recommendations and the selected clinical protocol.
This compatibility with adhesive luting is important for indirect restorations such as inlays, onlays, table tops and veneers, where bond stability contributes to the final result.
A printed restoration is not limited to printing
The final performance depends on the entire workflow: design, orientation, supports, cleaning, post-curing, finishing, polishing, fit control and bonding protocol.
For a definitive restoration, each step must be validated to ensure result quality and compliance with the indication.
Recommended digital workflow
VarseoSmile TriniQ must be used within a controlled workflow, with a compatible printer, validated material parameters and post-processing compliant with the instructions for use.
1 - CAD design: Prepare the restoration in the design software while respecting minimum wall thicknesses and manufacturer indications.
2 - Shade selection: Select the VITA shade suited to the clinical case: A1, A2, A3, A3.5, B1, B2, C2, D3, OM1 or OM3.
3 - 3D printing: Use a compatible SLA, DLP or LCD printer with a validated material file and 385–405 nm wavelength.
4 - Controlled cleaning: Clean the restoration according to the instructions, without exceeding the recommended times, then dry thoroughly.
5 - Post-curing: Cure with a validated UV unit, then inspect the object before finishing.
6 - Finishing and polishing: Remove supports, finish surfaces, adjust contact points and polish to achieve the final aesthetic result.
Printer compatibility: SLA, DLP and LCD
VarseoSmile TriniQ can be used with compatible 3D printing systems validated for the material. BEGO lists 385 nm and 405 nm printers according to SLA, DLP or LCD technologies.
Compatibility is not only a matter of wavelength: it also depends on the material file, calibration, layer thickness, orientation, cleaning and post-curing unit.
385 nm
A common wavelength on certain professional dental DLP or LCD printers.
405 nm
A frequent wavelength on validated dental SLA, LCD and DLP printers.
Material file
The validated material file is essential to obtain a compliant and reproducible result.
Always verify the exact compatibility of the printer, resin, vat, software and curing unit before clinical use.
VarseoSmile TriniQ technical characteristics
| Product | VarseoSmile TriniQ |
|---|---|
| Brand | BEGO |
| Family | Dental 3D printing material |
| Type | Ceramic-filled hybrid material, acrylate-based |
| Major indication | Definitive and temporary restorations according to manufacturer instructions |
| Compatible technologies | SLA, DLP and LCD according to validated printers |
| Wavelength | 385 to 405 nm |
| Layer thickness | 50 µm according to validated protocol |
| Shades | A1, A2, A3, A3.5, B1, B2, C2, D3, OM1, OM3 |
| Packaging | 250 g and 500 g bottles depending on shade |
| Flexural strength | 120 MPa |
| Flexural modulus | 3,600 MPa |
| Hardness | > 90 Shore D |
| Water absorption | < 12 µg/mm³ |
| Water solubility | < 0.6 µg/mm³ |
| Use | Reserved for dental professionals |
Before printing
Like any technical dental resin, VarseoSmile TriniQ must be carefully prepared before printing in order to obtain homogeneous filler distribution and reproducible results.
- Wear appropriate personal protective equipment.
- Shake the bottle according to the instructions before use.
- Check the shade, reference and expiry date.
- Verify printer and material file compatibility.
- Respect the recommended processing temperature.
- Avoid any contamination of the vat or resin.
After printing
Post-processing directly determines restoration compliance. Cleaning, drying, post-curing and polishing must be performed according to the instructions for use.
- Clean with the product validated by the manufacturer.
- Respect cleaning times.
- Dry thoroughly before post-curing.
- Use a compatible UV unit.
- Remove supports precisely.
- Finish and polish without overheating.
- Check fit before placement.
Post-curing: an essential step
For a definitive 3D printed restoration, post-curing is not a simple finishing step: it is a critical part of the protocol. It enables the material to reach the expected mechanical and biological properties.
With VarseoSmile TriniQ, a compatible curing unit must be used and the validated parameters must be followed. An incomplete or non-compliant protocol may compromise the final performance of the restoration.
Cleaning
Remove uncured resin without altering the surfaces of the part.
Drying
Avoid any solvent residue before post-curing.
Curing
Use a validated UV unit to achieve the expected properties.
VarseoSmile TriniQ compared with conventional dental resins
The major difference between VarseoSmile TriniQ and a conventional resin lies in its indication range. While many dental 3D resins are limited to models, guides, provisionals or indirect devices, TriniQ is positioned for definitive and temporary restorations.
| Criterion | VarseoSmile TriniQ | Conventional provisional resin |
|---|---|---|
| Main indication | Definitive and temporary restorations | Temporary restorations depending on material |
| Definitive bridges | Up to 3 units according to indication | Generally not indicated |
| Versatility | Crowns, bridges, inlays, onlays, veneers, prosthetic teeth | More limited use depending on resin |
| Aesthetics | 10 VITA shades, translucency, polishability | Variable depending on range |
| Positioning | Advanced restorative material for a validated workflow | Provisional or technical solution |
Use cases in laboratories and digital practices
Single-unit restoration
Digital production of crowns, inlays, onlays, table tops and veneers with aesthetic finishing.
Definitive 3-unit bridge
An interesting solution for indicated cases when the validated workflow and thicknesses are respected.
Long-span provisional
Possibility to produce extended temporary bridges up to 7 segments according to the manufacturer’s protocol.
Prosthetic teeth
Possible use for printed denture teeth within a digital prosthetic workflow.
Multi-indication laboratory
Reduction in the number of resins to manage thanks to a highly versatile formulation.
Equipped practice
In-house production of restorations according to validated printer, controlled protocol and clinical indication.
Handling safety
VarseoSmile TriniQ is a professional resin for dental 3D printing. Before complete polymerisation, the material must be handled with the usual precautions for light-curing resins.
- Wear suitable gloves.
- Wear protective eyewear and clothing if necessary.
- Avoid any skin contact with uncured resin.
- Work in a ventilated area.
- Follow the safety data sheet.
- Dispose of waste according to applicable regulations.
SDS points to know
The French safety data sheet mentions precautions related to skin sensitisation, professional handling and potential impact on the aquatic environment.
The product is reserved for professional use. Teams should refer to the SDS and BEGO instructions before use.
Safety information must always be checked on the most recent SDS corresponding to the batch and country of use.
Common errors to avoid
Cleaning and post-curing are essential to reach the expected performance.
The material must be used only within its indications and according to the recommended thicknesses.
Excessive cleaning time may affect surfaces or the properties of the printed object.
The final aesthetic result strongly depends on finishing and polishing quality.
The definitive indication remains governed by the instructions, case limitations and BEGO protocols.
Recommended complementary products
Fotowash Dreve
Controlled cleaning of 3D resin prints before post-curing.
Sun Beam 3D Mestra
Photopolymerisation chamber for post-processing printed parts.
3 L ultrasonic cleaner
Cleaning of printed parts according to the material protocol and compatible solvent.
Delivery
VarseoSmile TriniQ is a professional dental 3D printing resin. The bottle must be transported and stored according to the manufacturer’s instructions, away from excessive light or heat exposure.
- Product reserved for dental professionals.
- 250 g or 500 g bottle packaging.
- Keep in its original packaging.
- Close the bottle tightly after use.
- Respect the manufacturer’s storage conditions.
Storage and traceability
For a definitive restoration resin, traceability is essential: keep the batch number, reference, shade and date of use with the manufacturing file.
Batch To be traced
Shade To be documented
Parameters To be kept
Post-processing To be validated
VarseoSmile TriniQ documents and resources
Product brochure EN
BEGO document dedicated to VarseoSmile TriniQ: arguments, indications and references.
Download the product brochureBEGO instructions for use
Official BEGO basis for accessing the up-to-date instructions according to reference and batch.
View the EN instructions for useSafety data sheet
French VarseoSmile TriniQ SDS with handling precautions and regulatory information.
Download the SDS3D printer compatibility
BEGO list of printers, material files and components validated for Varseo materials.
View BEGO compatibilitiesFAQ – VarseoSmile TriniQ BEGO
Is VarseoSmile TriniQ BEGO really a 3D resin indicated for definitive restorations?
Yes. VarseoSmile TriniQ is indicated by BEGO for the production of definitive and temporary restorations, according to the indications, limitations and protocols specified in the manufacturer’s instructions.
This is a very important point, because dental 3D resins with an indication for definitive restoration remain far less common than resins intended for models, guides, splints or temporary restorations.
Which definitive restorations can be printed with VarseoSmile TriniQ?
VarseoSmile TriniQ can be used to produce definitive single-unit restorations such as crowns, inlays, onlays, table tops and veneers, in compliance with the BEGO protocol.
The material is also indicated for definitive bridges up to 3 units, provided that thicknesses, printing parameters, post-processing and manufacturer recommendations are respected.
Can VarseoSmile TriniQ also be used to print long-span temporary restorations?
Yes. In addition to definitive indications, VarseoSmile TriniQ can be used for temporary restorations, including temporary bridges up to 7 segments according to BEGO indications.
This versatility allows the equipped laboratory or practice to work with a single resin across several types of restorations while maintaining a consistent digital workflow.
Which dental 3D printing technologies is VarseoSmile TriniQ compatible with?
VarseoSmile TriniQ is intended for SLA, DLP and LCD 3D printing technologies, with a wavelength between 385 and 405 nm depending on the system used.
Compatibility must always be checked with the BEGO list, as the result depends on the printer, material file, calibration, cleaning and post-curing unit.
Can VarseoSmile TriniQ be used on any dental 3D printer?
No. To obtain a compliant restoration, a compatible printer with a material file validated for VarseoSmile TriniQ must be used.
Using a non-validated printer, an incorrect print profile or an incomplete post-processing protocol may compromise the mechanical, aesthetic and biological properties of the restoration.
Which VITA shades are available for VarseoSmile TriniQ BEGO?
VarseoSmile TriniQ is available in 10 shades: A1, A2, A3, A3.5, B1, B2, C2, D3, OM1 and OM3.
This range covers the most frequent aesthetic needs, from classic natural shades to lighter bleach-type shades.
Which packaging sizes are offered for VarseoSmile TriniQ resin?
VarseoSmile TriniQ is offered in 250 g and 500 g bottles depending on the selected shade.
The choice of packaging depends on production volume, the number of shades used in the laboratory and the frequency of restoration printing.
Can VarseoSmile TriniQ achieve a high-quality aesthetic finish after polishing?
Yes. BEGO highlights the translucency, colour stability and excellent polishability of VarseoSmile TriniQ.
The final result, however, depends on full compliance with the protocol: printing, cleaning, drying, post-curing, support removal, mechanical finishing and polishing.
Is it possible to add to or repair a restoration printed in VarseoSmile TriniQ?
BEGO indicates that the material can be supplemented and repaired with common composites, according to an adapted protocol.
This possibility is useful for adjustments, reworking or corrections, but it must always be performed according to the manufacturer’s recommendations and applicable clinical rules.
Why are cleaning and post-curing essential with a definitive resin such as VarseoSmile TriniQ?
For a definitive 3D printed restoration, post-processing is a critical step that directly influences the final properties of the material.
Insufficient cleaning, incomplete drying or non-compliant post-curing may compromise the strength, biocompatibility, aesthetics and durability of the restoration.
A highly strategic definitive 3D resin for the modern laboratory
VarseoSmile TriniQ BEGO is a premium dental 3D resin for laboratories and practices wishing to produce aesthetic, functional restorations compliant with a validated digital workflow.
Its main benefit is clear: it is a printable material indicated for definitive restorations, a category that remains highly selective in the dental market. With indications for crowns, definitive 3-unit bridges, inlays, onlays, table tops, veneers, long-span provisionals and prosthetic teeth, it covers a broad production scope with a single resin.
Thanks to its 10 VITA shades, ceramic filler, excellent polishability, colour stability and compatibility with validated 385–405 nm workflows, VarseoSmile TriniQ stands out as a highly professional solution for integrating 3D printing into definitive dental restoration.
VarseoSmile TriniQ BEGO definitive dental 3D resin