
Renfert MT premium Aqua Stop – Water Dental Plaster Trimmer Klettfix
Référence: 1807.0000

Why choose the MT premium with Klettfix?
Designed for water use only, the MT premium delivers productivity and cleanliness thanks to Aqua Stop.
The Klettfix disc allows very fast replacement and a consistently smooth finish.
Indications and benefits
- Trimming and finishing of plaster models (fixed, orthodontic, removable) in wet mode.
- Smooth cutting, reduced heat build-up and less splashing.
- Simple maintenance with tool-free removable components.
Operating instructions (summary)
- Connect water inlet, Ø 36 mm drain and 230 V power supply.
- Set the table to 90° or 98°, start the unit and adjust the water flow.
- Use Aqua Stop during breaks, then resume grinding.
- Clean the cover, table and water hose regularly.
Refer to the Renfert manual for detailed instructions.
Technical specifications
| Use | Water grinding only (dry use not permitted) |
|---|---|
| Voltage / Frequency | 220–240 V • 50/60 Hz |
| Power | 1300 W (≈ 1.74 hp) |
| Speed | ≈ 2880–3400 rpm |
| Max. water consumption | ≈ 7 L/min |
| Water pressure | 1–5 bar (14.5–72.5 psi) |
| Drain outlet Ø | 36 mm |
| Disc | Klettfix (SiC carbide) • Ø 234 mm • quick change |
| Dimensions (W × H × D) | ≈ 305 × 330 × 410 mm |
| Weight (without disc) | ≈ 13.5 kg |
Documents & resources
FAQ
Can the MT premium be used dry?
No, this model is designed for water use only.
Dry operation does not comply with the recommendations.
Always use water supply and check drainage.
Which disc is supplied with version 1807.0000?
Version 1807.0000 is supplied with a Ø 234 mm Klettfix disc.
The hook-and-loop backing enables fast replacement.
Silicon carbide ensures consistent wet grinding.
Which connections are required?
230 V grounded power supply.
Adjustable water inlet for wet grinding.
Ø 36 mm drain outlet.