Mestra thermocouple for dental burnout furnace
Earn 71 loyalty points
Référence: 080130-04
Livraison gratuite dès 198 €*
Paiement sécurisé - SSL
Livraison 24/48 h en France
Livraison 2 à 5 jours Europe
Paiement par virement
Paiement par chèque*
Paiement en 3 fois**
** Pour un achat de 300 à 1100 € en France (Choix dans le panier) - *Uniquement en France
Spare part for burnout furnace in the dental laboratory
Pyrometric rod for Mestra burnout furnace
Integrated temperature probe Precise heating control Replacement installation Technical Mestra accessory
The Mestra pyrometric rod is an essential part for the proper operation of a dental burnout furnace.
It enables the measurement of the actual temperature inside the muffle and contributes to the precision of the heating curve, the burnout of investment rings, and the repeatability of thermal cycles in the dental laboratory.
Brand
Mestra
SKU
080130.04
Function
Temperature measurement inside the furnace muffle
Use
Replacement of a worn, damaged or inaccurate pyrometric probe
A key component for reliable furnace thermal performance
In a dental laboratory, consistent heating in a burnout furnace directly affects the quality of preheating cycles and the stability of investments before casting.
A faulty pyrometric rod can lead to temperature deviations, poorly controlled burnout times, or less reproducible results.
This Mestra pyrometric probe helps maintain reliable thermal readings and consistent daily furnace operation.
Key points to remember
Simple and fast replacement Ceramic part must be handled carefully Check ceramic terminal tightening Replace in case of temperature error
Dental applications
- Pyrometric rod designed for Mestra burnout furnaces used in the dental laboratory.
- Temperature probe positioned inside the muffle to measure heat as close as possible to the working zone.
- More accurate control of the temperature rise during burnout of investment cylinders.
- An important component for the accuracy of heating programs and repeatability of thermal cycles.
- A useful maintenance part to preserve firing consistency and limit temperature drift over time.
Quick instructions for use
- Switch off the power to the furnace and allow it to cool completely before any intervention.
- Carefully remove the old pyrometric rod by loosening the ceramic connection terminal block.
- Insert the new probe into the designated opening without striking the ceramic section.
- Tighten the connection correctly, then check the stability of the entire assembly.
- Run a test cycle to verify correct temperature reading and furnace performance.
Why replace a worn pyrometric rod?
A dental furnace pyrometric probe that drifts or becomes damaged can disturb the actual temperatures reached inside the chamber.
This may result in less reliable cycles, poorly adjusted holding times, or insufficiently controlled burnout processes.
By replacing this part, you restore a more consistent thermal measurement and improve the reliability of your heating procedures for dental laboratory work.
Maintenance best practices
- Always handle the ceramic section carefully to avoid cracks and micro-impacts.
- Regularly check the tightness of the connection to prevent reading faults.
- Replace the probe in case of an error message, inconsistent temperature, or abnormal heating behavior.
- If possible, keep a spare part on hand to reduce furnace downtime in the dental laboratory.
Technical specifications
Product type
Pyrometric rod / probe for burnout furnace
Compatibility
Mestra burnout furnaces according to original factory assembly
Function
Measures the temperature inside the muffle during heating
Rod diameter
6 mm
Ceramic length
11 cm
Support washer diameter
4 cm
Connection
Ceramic connection terminal block
Workshop advice
On a preheating furnace for dental casting rings, inaccurate temperature readings are not always immediately visible.
However, they can gradually affect the quality of heating cycles.
Replacing a worn pyrometric rod is often a simple operation that helps restore more reliable furnace control and better day-to-day comfort in the laboratory.
Related products
Delivery
Contents: 1 complete Mestra pyrometric rod, ready to be installed on your furnace according to the original assembly.
This part is intended for the maintenance of Mestra dental burnout furnaces and fits into a fast technical replacement workflow in the dental laboratory.
FAQ
Click on a question to display the answer.
What is the purpose of the pyrometric rod in a Mestra burnout furnace?
The pyrometric rod contains the temperature probe that measures heat inside the muffle during burnout.
It provides the furnace with essential information to properly control temperature rise, holding stages, and soak times.
Without this measurement, a dental burnout furnace cannot accurately follow the heating curve defined by the program.
When should the pyrometric probe be replaced?
It is advisable to replace the probe in case of inconsistent temperatures, alarm messages, abnormal furnace behavior, unusual heating times, or if the ceramic section shows a crack. A worn pyrometric probe can distort the actual chamber temperature and make cycles less reliable.
Is the pyrometric rod fragile?
Yes, the ceramic part and the internal probe remain sensitive to shocks.
You should always work on a switched-off and fully cooled furnace, avoid lateral force, and never strike the rod against the chamber walls or metal parts.
Careful handling helps extend the service life of the component.
Is this pyrometric rod compatible with all Mestra furnaces?
This Mestra pyrometric rod is designed for Mestra burnout furnaces according to the original assembly and the connection type specified by the manufacturer.
If in doubt, it is best to check the part reference or the furnace technical documentation in order to confirm exact compatibility.
Key takeaway
The pyrometric rod for Mestra burnout furnace is a discreet but essential technical component for heating accuracy, cycle stability, and high-quality work in the dental laboratory.
By replacing a worn or damaged probe, you secure reliable furnace temperature reading and improve the repeatability of your burnout procedures.