Edenta Steel-Profi Green Cylinder — medium-grit rubber polisher (Ø 2.35 mm)
Référence: H16206
Rubber polisher with a medium grit for a consistent finish on CoCr frameworks, crowns and bridges made from non-precious alloys, with good heat control.
- Uniform finish without marking, ideal before final lustre.
- Time saver: removes micro-scratches quickly.
- Control: works cleanly on functional areas (occlusal) without overheating.
Lab tip: use light pressure and continuous strokes to preserve geometry and extend cylinder life.
Steel-Profi rubber cylinder: precise, repeatable polishing
The Steel-Profi green cylinder is designed for dental lab workflows: it smooths and evens non-precious alloys (CoCr frameworks, metal substructures) and prepares a clean surface before finer finishing steps. Its medium grit corrects machining traces while keeping a controlled feel on functional areas.
Applications & lab advantages
- CoCr frameworks: micro-scratch correction and surface uniformity.
- Metal crowns & bridges: consistent finish, without “ripples”.
- Occlusal areas: smooths without excessive rounding when pressure is controlled.
How to use (best practice)
- Mount the cylinder on a Ø 2.35 mm mandrel (screw-on).
- Work with light touches, avoiding long dwell time in one spot.
- Control heat build-up: air spray / intermittent cooling if needed.
- Finish with a finer polisher or a lustre step according to your protocol.
To avoid cross-contamination, keep one set dedicated to non-precious alloys and another for sensitive materials.
Why it performs so well on non-precious alloys
- A dense rubber body that holds shape and delivers a steady cut.
- A balanced medium grit: efficient removal without deep scratching.
- Stable behaviour for repeatable results across series work.
Expected outcome
A more uniform surface, ready for your finishing steps: faster shine, fewer reworks, and better control on visible areas.
Technical specifications
| Brand | Edenta |
|---|---|
| Reference / SKU | H16206 |
| Type | Steel-Profi cylinder |
| Material | High-quality rubber |
| Grit | Medium (pre-finish / micro-scratch correction) |
| Dimensions | 6 × 22 mm |
| Mounting | Ø 2.35 mm mandrel (screw-on) |
| Indication | Polishing non-precious alloys (CoCr frameworks) |
| Packaging | Box of 100 pieces |
Related products
Shipping
You receive 1 box of 100 pieces: Steel-Profi green cylinders (Edenta), ready to mount on a Ø 2.35 mm mandrel.
FAQ
Which materials is the Steel-Profi green cylinder designed for?
This cylinder is intended for polishing non-precious alloys: CoCr frameworks, metal substructures,
and crown/bridge metal components. The medium grit is ideal to remove micro-scratches and even the surface before finer finishing.
For precious alloys or ceramics, use dedicated abrasives to avoid deep scratches and cross-contamination.
Which mounting and speeds are recommended in the lab?
Mount it on a Ø 2.35 mm mandrel (screw-on) and run at medium speed with light pressure.
Keep continuous strokes and avoid dwelling in one spot to limit heat build-up and preserve geometry (especially occlusal).
If needed, cool intermittently with air spray to maintain an even, consistent finish.
How can I extend the cylinder’s service life?
Let the grit do the work: excessive pressure “glazes” the surface and increases heat.
Remove metal loading as soon as it appears (soft brush) and store cylinders away from heat and solvents.
Replace the tool when the shape is no longer crisp to keep a controlled finish and avoid time-consuming rework.
Following with a finer polisher also reduces overall wear while speeding up the final shine.
Edenta Steel-Profi Green Cylinder — medium-grit rubber polisher (Ø 2.35 mm)