Renfert MT3 Klettfix Wet Model Trimmer for Dental Laboratory
Earn 1 loyalty points
Référence: 1808.0000
Livraison gratuite dès 198 €*
Paiement sécurisé - SSL
Livraison 24/48 h en France
Livraison 2 à 5 jours Europe
Paiement par virement
Paiement par chèque*
Paiement en 3 fois**
** Pour un achat de 300 à 1100 € en France (Choix dans le panier) - *Uniquement en France
Renfert MT3 Klettfix wet model trimmer for dental laboratory
Brand: Renfert • SKU: 1808.0000 • Type: Wet model trimmer with Klettfix disc
Wet use Disc Ø 234 mm Angle 90° / 98°
Application Trimming of plaster models and bases
Mounting Klettfix silicon carbide disc
Positioning Inclined unit for improved visibility
Consistent wet grinding Open-door safety shut-off Simplified maintenance
Power1300 W
Speed2880–3400 rpm
Max. water7 L/min
Weight13.2 kg
The Renfert MT3 is designed for everyday laboratory work: consistent wet cutting, good model visibility, quick table angle change and practical maintenance to keep a trimming station clean and efficient.
Why choose the Renfert MT3 with Klettfix disc?
The Renfert MT3 is a wet model trimmer designed for precise preparation of plaster models in the dental laboratory. With its Klettfix silicon carbide disc, it provides consistent material removal, good cutting stability and cleaner wet operation on study, working or diagnostic models.
Its value is not limited to motor power. The MT3 also delivers real production comfort: favourable visibility over the trimming area, quick table tilt change to 90° / 98°, integrated safety shut-off when opened, and a water supply system positioned to help reduce disc clogging.
Practical benefits for the dental laboratory
- Consistent wet cutting for trimming bases, squaring models and refining plaster casts with good working stability.
- Klettfix disc designed for wet grinding, with a mounting system intended for easy replacement in the laboratory environment.
- Uniform water flow thanks to the optimised water tube positioning, helping reduce clogging of the disc during trimming.
- Operational safety: when the front door is open, the system shuts off both the motor and the water supply.
- Quick table angle adjustment to 90° / 98° to adapt preparation according to model type or technician preference.
- Simplified maintenance with removable components for easier cleaning after intensive trimming sessions.
Dental applications of the MT3
- Trimming of plaster models from conventional impressions or duplication procedures.
- Correction of bases and model bottoms to improve stability on the bench or mounting station.
- Preparation of models intended for control steps, wax-up procedures or placement in an articulator.
- Daily work on removable prosthetic, fixed prosthetic, orthodontic or study models when the laboratory requires a reliable wet plaster trimmer.
How to use in the laboratory
- Correctly connect the water inlet and drainage before operation.
- Install the Klettfix disc suitable for wet operation and check its general condition before use.
- Select the proper table angle according to model geometry and desired cut.
- Start the unit and guide the model steadily without excessive pressure to maintain a clean cut.
- After use, clean the chamber, table, water tube and drain to prevent build-up of plaster residues.
Refer to Renfert documentation for complete safety, installation and maintenance instructions.
Who is this wet model trimmer intended for?
The MT3 Klettfix is particularly suitable for laboratories looking for a serious, robust and easy-to-run machine for everyday use, without immediately moving to a more advanced configuration. It is a logical solution for facilities wanting a high-performance Renfert model trimmer for wet operation, with practical features and a workstation that is easy to keep clean.
For standard plaster model trimming workflows, the MT3 offers a strong balance between motor power, ease of use, operator safety and manageable maintenance.
Technical specifications of the Renfert MT3 Klettfix
| Voltage / frequency | 220–240 V • 50/60 Hz |
|---|---|
| Power consumption | 1300 W (≈ 1.74 hp) |
| Rotational speed | 2880–3400 rpm |
| Max. water consumption | 7 L/min |
| Water pressure | 1–5 bar |
| Drain Ø | 36 mm |
| Disc Ø | 234 mm — Klettfix disc for wet use |
| Dimensions (W × H × D) | 305 × 330 × 410 mm |
| Weight | 13.2 kg (without disc) |
| Table angles | 90° / 98° |
| Supplied with | 1 MT3, Klettfix disc, water and drainage hoses, tool set |
Related products for the Renfert MT3 model trimmer
Documents & resources
FAQ — Renfert MT3 Klettfix model trimmer
Is the Renfert MT3 designed only for wet use?
Yes. The MT3 version with Klettfix disc is designed for wet operation.
Water supply helps maintain cutting consistency, reduces overheating and limits clogging while trimming plaster models.
What is the benefit of the 90° / 98° angle setting?
The quick table tilt adjustment makes it easier to adapt working posture and trimming geometry according to the model type.
This is useful for improved comfort, visibility and precision when preparing bases and reference planes.
What maintenance operations are recommended?
After use, it is advisable to regularly clean the chamber, grinding table, water tube and drainage system.
Consistent maintenance helps preserve stable cutting performance, reduce plaster deposits and maintain reliable long-term operation.
What type of laboratory is this model best suited for?
The MT3 is very well suited to laboratories looking for a robust and efficient Renfert model trimmer for daily wet use, offering a strong balance between build quality, ease of operation and practical maintenance.
Renfert MT3 Klettfix Wet Model Trimmer for Dental Laboratory