Mestra compact, high-performance electrolytic polishing bath with pulsed air agitation
Earn 838 loyalty points
Référence: 100291
European delivery depending on destination
Secure payment by credit or debit card
Secure payment with PayPal
PayPal may offer Pay in 3 if the customer and purchase are eligible
Credit / debit card
PayPal
Bank transfer
* Instalment payment may be offered by PayPal subject to customer and purchase eligibility. Available options may vary depending on the PayPal account.
Brand: Mestra SKU: 100293 Electrolytic polishing Pulsed air agitation 0.80 L tank 2 programmes 100 W
Mestra 100293 Electrolytic Polishing Bath – Uniform Polishing of Dental Metal Frameworks with Pulsed Air Agitation
The Mestra 100293 electrolytic polishing bath is a compact unit designed for the electrolytic polishing of dental alloys in dental laboratories.
It provides a more uniform finish on metal frameworks, removable partial denture frameworks, cast structures and compatible metal components, while reducing the time required for intensive manual polishing.
This new-generation unit incorporates a pulsed air agitation system. The circulation of the electrolyte promotes more consistent treatment of metal surfaces and minimises stagnant areas within the tank.
Pulsed Air Agitation Uniform circulation of the electrolyte
2 Programmes Settings adapted to repetitive polishing tasks
0.80 L Compact removable tank
2.9 kg Lightweight, space-saving design
Why Use an Electrolytic Polishing Bath in a Dental Laboratory?
Electrolytic polishing provides a consistent finish on dental metal alloys without the need for multiple manual polishing stages.
This method is particularly useful for cast frameworks, removable partial denture frameworks, implant-supported structures and complex components with areas that are difficult to access using conventional polishing techniques.
The Mestra 100293 polishing bath helps dental technicians save time, improve the reproducibility of results and achieve a more uniform metal surface before subsequent finishing or inspection procedures.
Pulsed Air Agitation: More Uniform Electrolyte Circulation
The pulsed air agitation system integrated into the Mestra electrolytic polishing bath keeps the electrolyte solution moving throughout the treatment cycle.
This agitation improves the exchange of electrolyte at the surface of metal components and contributes to more uniform polishing. It also reduces areas of stagnant liquid that could affect the consistency of the finish.
Combined with precise electronic controls, this technology makes the unit more convenient to operate for routine dental laboratory applications.
Applications of the Mestra Electrolytic Polishing Bath in Dental Prosthetics
Removable Partial Denture Frameworks
Uniform polishing of removable partial denture metal frameworks and complex metal structures.
Dental Alloys
Treatment of alloys used in dental laboratories, subject to compatibility with the selected electrolyte solution.
Implant-Supported Structures
Improvement of the surface finish of compatible metal components intended for implant-supported restorations.
Daily Laboratory Production
A suitable solution for dental laboratories seeking to automate part of their metal finishing workflow.
Advantages of the Mestra 100293 Electrolytic Polishing Bath
Uniform Polishing
Provides a consistent finish on compatible metal surfaces, including complex geometries.
Reduced Manual Finishing
Reduces the time spent on certain repetitive mechanical polishing operations.
Electronic Controls
More precise adjustment of operating parameters to suit different polishing applications.
Removable Tank
Facilitates maintenance, electrolyte replacement and cleaning of the unit.
Two Operating Programmes
The Mestra 100293 features 2 programmes that allow operating parameters to be adapted to different types of metal frameworks and components processed in the dental laboratory.
These programmable settings improve cycle repeatability when the same types of frameworks or structures are treated regularly.
Dental technicians can therefore organise their polishing protocols with greater consistency.
Compact Digital Control System
The unit is designed for straightforward daily operation, with digital controls that allow the essential cycle parameters to be managed.
Its compact design enables easy installation on a laboratory workbench without occupying a large working area.
With a 0.80-litre tank, it meets the routine electrolytic polishing requirements of dental laboratories.
A Compact Design Developed for Modern Dental Laboratories
With dimensions of 145 x 210 x 250 mm, the Mestra electrolytic polishing bath can be easily accommodated in laboratories where workspace is limited.
Its weight of 2.9 kg makes installation and relocation straightforward when required.
The removable tank simplifies routine maintenance and replacement of the electrolyte solution. This practical design helps maintain consistent performance over time.
Recommended Operating Procedure for the Mestra 100293 Electrolytic Polishing Bath
- Check that the dental alloy is compatible with the electrolyte solution being used.
- Place the unit on a stable, clean surface suitable for dental laboratory work.
- Fill the tank with the recommended electrolyte, following the manufacturer's instructions.
- Correctly position the metal components to be treated.
- Select the appropriate operating programme.
- Start the electrolytic polishing cycle.
- Monitor the treatment according to the laboratory's established protocol.
- Carefully remove the components once the cycle is complete.
- Rinse and process the components according to the recommendations for the electrolyte used.
- Clean the removable tank after use when necessary.
Best Practices for Electrolytic Polishing
- Use only an electrolyte solution compatible with the alloy being treated.
- Follow the recommended treatment times.
- Avoid overloading the tank.
- Check the condition of the electrolyte solution before each cycle.
- Clean the removable tank regularly.
- Wear appropriate personal protective equipment when handling chemical products.
Common Mistakes to Avoid
- Using an electrolyte solution that is unsuitable for the alloy.
- Treating components without checking their compatibility.
- Leaving contaminated electrolyte in the tank for extended periods.
- Confusing electrolytic polishing with final mechanical polishing.
- Operating the unit without following the manufacturer's instructions.
- Neglecting maintenance of the tank and agitation system.
Comparison: Electrolytic Polishing vs Intensive Manual Polishing
| Criterion | Intensive Manual Polishing | Mestra 100293 Electrolytic Polishing Bath |
|---|---|---|
| Uniformity | Highly dependent on operator technique and accessibility of the surfaces. | More consistent polishing of compatible metal surfaces. |
| Difficult-to-Reach Areas | Limited access to complex frameworks and detailed metal structures. | The electrolyte acts across the entire immersed surface. |
| Working Time | Longer processing time involving multiple mechanical finishing stages. | Reduces certain repetitive manual polishing operations. |
| Repeatability | Varies according to the operator and complexity of the component. | Two programmes help improve cycle consistency. |
| Liquid Circulation | Not applicable. | Pulsed air agitation promotes uniform electrolyte circulation. |
| Maintenance | Wear of polishing instruments and consumables. | Removable tank facilitates cleaning and electrolyte replacement. |
Mestra 100293 Electrolytic Polishing Bath – Technical Specifications
| Product | Compact Digital Electrolytic Polishing Bath |
|---|---|
| Brand | Mestra |
| Reference | 100293 |
| Application | Electrolytic polishing of metal frameworks and compatible dental alloys |
| Power Supply | 220 V - 50/60 Hz |
| Power | 100 W |
| Tank Capacity | 0.80 L |
| Programming | 2 programmes |
| Agitation | Pulsed air agitation system |
| Height | 145 mm |
| Width | 210 mm |
| Depth | 250 mm |
| Weight | 2.9 kg |
Recommended Related Products
Delivery Contents
Supplied: 1 Mestra 100293 electrolytic polishing bath, with integrated pulsed air agitation system and programmable electronic controls.
- 1 Mestra 100293 electrolytic polishing bath.
- 220 V - 50/60 Hz power supply.
- Power: 100 W.
- Removable 0.80 L tank.
- Pulsed air agitation system.
- Electronic controls with 2 programmes.
FAQ – Mestra 100293 Electrolytic Polishing Bath
What are the advantages of electrolytic polishing compared with manual polishing?
Electrolytic polishing provides a more uniform finish across the entire component, including certain areas that are difficult to access.
It reduces manual working time and improves the consistency of the final finish on compatible alloys.
What is the purpose of pulsed air agitation?
Pulsed air agitation maintains continuous circulation of the electrolyte solution within the tank.
This circulation improves electrolyte exchange at the component surfaces and contributes to more uniform polishing.
Is the Mestra electrolytic polishing bath easy to clean?
Yes. The removable tank and smooth surfaces facilitate maintenance and replacement of the electrolyte solution.
Regular maintenance helps keep the unit in good operating condition.
What are the benefits of having two programmes?
The two programmes allow operating parameters to be adapted to the different types of work performed in the dental laboratory.
This makes repetitive operations easier and improves the reproducibility of results.
Is this model suitable for a dental laboratory?
Yes. Its compact design, 0.80 L tank, two programmes and pulsed air agitation system meet the routine requirements of many dental laboratories.
It is particularly suitable for laboratories seeking to improve polishing consistency on compatible metal frameworks.
Can any electrolyte solution be used with this unit?
No. The electrolyte solution must be compatible with the unit, the alloy being treated and the manufacturer's recommendations.
Electrolyte compatibility is essential for both polishing quality and the safety of the treatment procedure.
Mestra 100293 Electrolytic Polishing Bath: A Compact Solution for More Consistent Metal Polishing
The Mestra 100293 electrolytic polishing bath is a professional solution for polishing metal frameworks, removable partial denture frameworks, cast structures and compatible dental alloys.
Its pulsed air agitation system, removable 0.80-litre tank, 2 programmes and electronic controls make it suitable for dental laboratories seeking more uniform and reproducible polishing results with less dependence on manual technique.
Compact, practical and easy to integrate into a finishing workstation, it is a valuable piece of equipment for improving the organisation of electrolytic polishing operations in dental laboratories.
Mestra compact, high-performance electrolytic polishing bath with pulsed air agitation