Ivotion Base Ivoclar PMMA Disc Ø98 mm – CAD CAM Denture Base for Dental Lab
Référence: HD0146
Ivotion Base Ivoclar — PMMA CAD/CAM disc for denture bases
Ivotion Base is a high-strength PMMA disc designed for the digital manufacturing of removable denture bases through CAD/CAM milling.
Its industrial manufacturing process ensures homogeneous quality, excellent dimensional stability, and a clean, consistent and reliable denture base for dental laboratories.
Key benefits of Ivotion Base disc for dental laboratories
PMMA CAD/CAM disc for removable denture bases
The Ivotion Base Ivoclar disc meets the needs of laboratories looking to produce digital denture bases using a reliable, dense and reproducible material.
Unlike manual processes that are sensitive to handling variations, milling from an industrial PMMA disc ensures precision fit, consistent surface quality and predictable final results.
It integrates seamlessly into digital removable prosthetic workflows, from CAD design to milling, finishing and polishing.
Key point: Ivoclar positions Ivotion Base as a high-impact resistant denture base material for CAD/CAM technology, dedicated to digitally milled removable prostheses.
Dental prosthetic applications
- Complete denture bases (maxillary and mandibular).
- Removable partial dentures with milled base.
- Implant-supported prostheses and overdentures.
- Immediate dentures based on digital workflows.
- Digital duplicates and prosthetic renewals.
Advantages for CAD/CAM workflow
- Reproducible production for standardized results.
- Reduced manual variability through controlled milling.
- Excellent dimensional stability during machining.
- Compatibility with open systems using Ø98 mm discs.
- Simplified finishing through pre-polishing and final polishing.
Milling guide for Ivotion Base PMMA
To achieve a clean, stable and comfortable denture base, milling must be performed using strategies adapted to dental PMMA resins.
Milling preparation
- Use a CAD/CAM milling unit compatible with Ø98 mm discs.
- Check proper disc fixation before starting the program.
- Select a PMMA-specific milling strategy to reduce vibrations.
- Use clean, sharp tools suitable for resin machining.
Post-milling finishing
- Trim carefully without overheating thin areas or margins.
- Pre-polish progressively using a fine pumice.
- Polish with a cotton brush and PMMA polishing compound.
- Thoroughly clean the base before final inspection and delivery.
Lab tip: avoid excessive pressure during polishing. Too much pressure can generate heat, affect surface gloss or deform thin areas of the denture base.
Ivotion Base gingival shades
Ivotion Base is available in gingival shades coordinated with the Ivoclar system. Common shades include Pink, Pink-V, Preference, 34-V and US-D.
Shade selection depends on the desired gingival appearance, patient profile and prosthetic integration. This consistency simplifies communication between the laboratory, clinician and patient.
Technical specifications
| Product | Ivotion Base Ivoclar |
|---|---|
| Massilia Dental SKU | HD0146 |
| Material type | PMMA for denture bases |
| Main indication | Denture bases for digital removable prosthetics |
| Process | Subtractive CAD/CAM milling |
| Diameter | Ø98 mm / Ø98.5 mm depending on milling system |
| Thickness | 30 mm |
| Shades | Pink, Pink-V, Preference, 34-V, US-D depending on availability |
| Compatibility | Open CAD/CAM milling systems compatible with Ø98 mm discs and Ivotion workflow |
| Finishing | Trimming, pre-polishing, mechanical polishing and final cleaning |
Ivotion Base vs standard PMMA
Ivotion Base is specifically designed for CAD/CAM denture base applications, offering a homogeneous industrial material optimized for digital production.
It reduces variability associated with traditional techniques and provides more consistent fit, finish and overall quality.
Ivotion Base vs Ivotion monolithic
Ivotion Base is dedicated to gingival base material. Ivotion monolithic discs combine denture teeth and base material in a single disc for full monolithic prosthesis production.
The choice depends on the workflow: base-only production or full monolithic prosthesis depending on equipment and laboratory strategy.
Lab tip for high-gloss finishing
After milling, work in stages: gentle trimming, progressive pre-polishing and final polishing with a suitable cotton brush. The goal is to obtain a smooth, comfortable and easy-to-clean surface.
- Avoid working too long on the same area during polishing.
- Monitor temperature between each step.
- Clean pumice residues before final polishing.
- Maintain efficient dust extraction during PMMA trimming.
Documents & resources
Ivoclar manufacturer resource
Ivotion Base is part of the Ivotion system for digital removable prosthetics production.
Laboratory control
Before use, always verify machine compatibility, milling strategy and CAM software parameters.
Related products
Delivery
1 Ivotion Base disc Ø98 mm — selectable version.
- Packaging suitable for CAD/CAM discs.
- Visual inspection recommended upon receipt before storage.
FAQ — Ivotion Base Ivoclar
What is Ivotion Base used for?
Ivotion Base is used to manufacture removable denture bases using CAD/CAM milling.
It is designed for laboratories working with digital workflows that require precise, stable and reproducible denture bases.
The disc is suitable for complete, partial, immediate dentures, duplicates and overdentures depending on the prosthetic design.
What is the difference compared to standard PMMA?
Ivotion Base is engineered as a high-strength denture base material for CAD/CAM technology.
Its industrial manufacturing ensures a homogeneous and consistent material optimized for milling.
This homogeneity allows laboratories to achieve more consistent quality with fewer variations compared to manual processing methods.
Is the disc compatible with open milling systems?
Yes, the Ø98 mm / Ø98.5 mm format is designed for CAD/CAM systems compatible with this disc size.
However, it is important to verify the holder, thickness compatibility, CAM strategy and machine recommendations.
Proper setup ensures safe and accurate denture base milling.
What shades are available for Ivotion Base?
The commonly available shades are Pink, Pink-V, Preference, 34-V and US-D, depending on supplier availability.
These shades allow better gingival integration and improved aesthetic outcomes for removable prostheses.
How to properly polish an Ivotion Base denture base?
After milling, gently trim, pre-polish with fine pumice and finish with a polishing brush suitable for PMMA materials.
Keep pressure light to avoid overheating. Progressive polishing ensures a smoother, more comfortable and hygienic surface for the patient.
Ivotion Base Ivoclar PMMA Disc Ø98 mm – CAD CAM Denture Base for Dental Lab