Steelprofi cylindre vert caoutchouc Edenta 1423UM-100 polissage métaux non précieux aramture et bridges et stellite chrome-cobalt
Steelprofi cylindre vert caoutchouc Edenta 1423UM-100 polissage métaux non précieux aramture et bridges et stellite chrome-cobalt infos du produit
Steelprofi cylindre vert caoutchouc Edenta 1423UM-100 polissage métaux non précieux aramture et bridges et stellite chrome-cobalt boite 100 pièces
Steelprofi cylindre vert caoutchouc Edenta 1423UM-100 polissage métaux non précieux aramture et bridges et stellite chrome-cobalt
Steelprofi cylindre vert caoutchouc Edenta 1423UM-100 polissage métaux non précieux aramture et bridges et stellite chrome-cobalt infos du produit
Steelprofi cylindre vert caoutchouc Edenta 1423UM-100 polissage métaux non précieux aramture et bridges et stellite chrome-cobalt boite 100 pièces

Edenta Steelprofi Green Cylindrical Polisher – Co-Cr 1423UM-100

  • 25,95 €
  • Unit price
Earn 25 loyalty points

Référence: 1423UM-100

- +
European delivery depending on destination
Secure payment by credit or debit card
Secure payment with PayPal
PayPal may offer Pay in 3 if the customer and purchase are eligible
Credit / debit card
PayPal
Bank transfer
* Instalment payment may be offered by PayPal subject to customer and purchase eligibility. Available options may vary depending on the PayPal account.
Edenta Steelprofi green cylindrical rubber polisher for non-precious dental alloys, Co-Cr removable partial denture frameworks, metal crowns and bridges
Brand: Edenta Steelprofi Green cylindrical polisher Medium grit 6 × 22 mm SKU: 1423UM

Edenta Steelprofi green cylindrical rubber polisher for non-precious dental alloys, Co-Cr frameworks, crowns and bridges

The Edenta Steelprofi green cylindrical rubber polisher is designed for the uniform finishing of non-precious dental alloys, cobalt-chromium removable partial denture frameworks, metal substructures, crowns and bridges.

Its medium grit helps remove fine scratches, smooth metal surfaces and prepare restorations for subsequent fine polishing. The 6 × 22 mm cylindrical shape provides stable contact, particularly suitable for functional surfaces and occlusal areas requiring controlled finishing.

Medium grit Controlled removal of fine surface scratches
Non-precious alloys Co-Cr frameworks, metal crowns and bridges
6 × 22 mm Stable polishing on functional and occlusal surfaces
Box of 100 Professional packaging for dental laboratories

Steelprofi cylindrical rubber polisher for uniform metal finishing

In dental laboratories, polishing non-precious alloys requires a tool capable of smoothing metal surfaces without generating excessive heat. The green Steelprofi cylindrical polisher offers an excellent balance between polishing efficiency, control and surface quality.

Its high-quality rubber composition provides progressive contact with the metal. It helps reduce machining marks, smooth surfaces and prepare a clean, uniform finish before the final high-gloss polishing stage.

This cylindrical polisher is particularly useful for cobalt-chromium removable partial denture frameworks, metal substructures, crowns, bridges and metal areas requiring consistent finishing before final polishing.

Applications in dental laboratories

The Edenta Steelprofi green cylindrical rubber polisher is designed for finishing and pre-polishing non-precious dental alloys.

  • Polishing cobalt-chromium removable partial denture frameworks.
  • Finishing Co-Cr alloys and metal substructures.
  • Preparing metal crowns and bridges for final high-gloss polishing.
  • Removing fine scratches after grinding or initial finishing.
  • Polishing occlusal areas and functional metal surfaces.
  • Producing a uniform surface before progressing to a finer abrasive.

Benefits for dental technicians

The cylindrical shape provides a stable contact surface, helping dental technicians achieve consistent and repeatable finishing results.

  • Medium grit for controlled scratch removal without aggressive abrasion.
  • Dense rubber composition for stable, progressive polishing action.
  • Cylindrical shape suitable for flat surfaces and occlusal areas.
  • Heat control through light pressure and continuous movements.
  • 2.35 mm shank mandrel for screw-type mounting.
  • Box of 100 pieces suitable for intensive dental laboratory use.

Medium grit for removing fine scratches before final polishing

The green medium-grit abrasive helps remove fine scratches, machining marks and surface irregularities remaining after previous finishing procedures.

It prepares a smoother, more uniform surface before progressing to a finer abrasive, polishing compound or final high-gloss polishing stage. Proper surface preparation helps reduce additional finishing work and saves time during final polishing.

The cylindrical polisher should not be used with excessive pressure. Allow the abrasive to work progressively to maintain a consistent surface finish and minimise heat generation.

Cylindrical shape for metal surfaces and occlusal areas

The cylindrical shape provides stable contact on metal surfaces, occlusal areas, flat surfaces and broad transitions.

It allows uniform finishing while helping prevent unwanted surface undulations or pronounced facets when light pressure and continuous movements are maintained.

6 × 22 mm dimensions for efficient polishing

The 6 × 22 mm dimensions provide a convenient working surface for metal frameworks, cobalt-chromium removable partial dentures, crowns and bridges.

This format combines polishing efficiency with precise control, particularly on areas where surface uniformity must be improved without altering the restoration's geometry.

High-quality rubber for consistent polishing performance

The rubber composition of the Steelprofi cylindrical polisher provides more progressive abrasive action than a rigid grinding instrument. It helps maintain control when finishing metal surfaces while reducing the risk of excessive surface marking.

This characteristic is especially beneficial when working on non-precious dental alloys, which require careful surface preparation before final polishing. The finishing process becomes more stable, uniform and repeatable during routine laboratory procedures.

To maintain the polisher's effectiveness, remove accumulated metal deposits when necessary and replace the tool when its shape becomes irregular.

Mounting on a mandrel with a 2.35 mm shank

The green Steelprofi cylindrical rubber polisher is mounted on a mandrel with a 2.35 mm shank diameter, suitable for screw-mounted polishing wheels and rubber polishers. This mounting system is compatible with dental laboratory micromotors and appropriate straight handpieces.

Before use, check that the mandrel is securely tightened, that the polisher is in good condition and that no abnormal vibration occurs. Stable mounting improves precision and helps prevent unwanted marks on metal surfaces.

2.35 mm shank Screw-type mounting on a suitable mandrel
10,000 rpm Indicative operating speed
Light pressure Allow the abrasive to work without excessive force
Cooling Compressed air or water according to laboratory protocol

Recommended polishing procedure

The green cylindrical polisher is used after initial metal finishing to smooth surfaces and prepare them for finer polishing.

Prepare Complete initial grinding or surface correction if required
Mount Secure the cylindrical polisher to a 2.35 mm shank mandrel
Polish Work at moderate speed with light pressure
Final polish Finish with a finer abrasive or suitable polishing compound

Minimising heat generation during metal polishing

Non-precious dental alloys can heat up rapidly when excessive pressure is applied or when the polisher remains in contact with the same area for too long.

  • Work at moderate speed, around 10,000 rpm according to laboratory protocol.
  • Apply light, consistent pressure.
  • Maintain continuous polishing movements.
  • Avoid prolonged contact with the same area.
  • Cool with compressed air or water when necessary.
  • Inspect the surface between polishing passes.

Preserving functional metal surfaces

The cylindrical polisher should improve surface quality without excessively rounding important areas of the metal restoration.

  • Adjust the contact angle to the geometry of the restoration.
  • Avoid excessive pressure on edges.
  • Use light, controlled polishing passes.
  • Avoid creating depressions on flat surfaces.
  • Use a finer abrasive for the final high-gloss finish.

When should the green Steelprofi cylindrical polisher be used?

Application Benefits of the green cylindrical polisher Objective
After grinding or initial finishing Medium grit for removing fine scratches Prepare the surface for final polishing
Co-Cr removable partial denture frameworks Stable cylindrical shape Achieve a uniform finish while preserving geometry
Metal crowns and bridges Consistent polishing action Produce a uniform surface before high-gloss polishing
Occlusal areas Controlled contact on functional surfaces Smooth the surface without excessive rounding
Pre-polishing Progressive rubber abrasive action Reduce the time required for final finishing

Technical specifications

Product Edenta Steelprofi green cylindrical rubber polisher
Brand Edenta
Reference / SKU 1423UM
Type Cylindrical rubber polisher
Product range Steelprofi
Colour Green
Grit Medium, for pre-finishing and fine scratch removal
Material High-quality rubber abrasive
Dimensions 6 × 22 mm
Mounting Screw-mounted on a mandrel with a 2.35 mm shank
Indicative operating speed Approximately 10,000 rpm, adjusted according to the restoration and laboratory protocol
Intended use Finishing, pre-finishing and pre-polishing non-precious dental alloys
Applications Co-Cr removable partial denture frameworks, cobalt-chromium alloys, metal substructures, crowns and bridges
Packaging Box of 100 pieces

Maintenance of Steelprofi cylindrical polishers

Simple maintenance helps maintain consistent abrasive performance and achieve a more uniform finish on non-precious dental alloys.

  • Remove accumulated metal deposits when they appear.
  • Avoid excessive pressure, which may cause the abrasive surface to glaze.
  • Store in a dry location, away from heat and solvents.
  • Reserve the polisher for non-precious metal alloys.
  • Replace the polisher when its shape becomes irregular or its abrasive efficiency decreases.

Recommended safety practices

Polishing dental metal alloys should be performed with effective dust extraction, suitable personal protective equipment and appropriate temperature control.

  • Wear suitable eye protection.
  • Use effective extraction to minimise exposure to metal dust.
  • Check that the mandrel is securely tightened before use.
  • Ensure that the polisher rotates without abnormal vibration.
  • Cool thin or heat-sensitive areas regularly when necessary.

Packaging and contents

Supplied as a box of 100 Edenta Steelprofi green cylindrical rubber polishers, medium grit, dimensions 6 × 22 mm, reference 1423UM, for mounting on a mandrel with a 2.35 mm shank diameter.

FAQ – Edenta Steelprofi green cylindrical rubber polisher

Which materials can be polished with the green Steelprofi cylindrical polisher?

The Edenta Steelprofi green cylindrical rubber polisher is designed for polishing non-precious dental alloys, particularly cobalt-chromium removable partial denture frameworks, metal substructures, crowns and bridges.

For precious alloys, dental ceramics or acrylic resins, use abrasives specifically designed for those materials to avoid inappropriate surface scratches or cross-contamination.

What is the purpose of the green medium-grit abrasive?

The medium-grit abrasive helps remove fine scratches, smooth metal surfaces and prepare the restoration for finer polishing or final high-gloss finishing.

It reduces additional finishing work and helps achieve a more uniform surface on Co-Cr frameworks, metal substructures, crowns and bridges.

Which mandrel should be used?

The cylindrical polisher is mounted on a suitable screw-type mandrel with a 2.35 mm shank diameter.

Before use, check that the mandrel is securely tightened, no abnormal vibration occurs and the polisher is in good condition to ensure precise and safe operation.

What operating speed is recommended?

A moderate speed of approximately 10,000 rpm may be used as a general reference, adjusted according to the restoration, micromotor and laboratory protocol.

Use light pressure, continuous movements and appropriate cooling to minimise heat generation during metal polishing.

How can the service life of the cylindrical polisher be extended?

Allow the abrasive to work without excessive pressure, remove accumulated metal deposits and store the polishers away from heat and solvents.

Replace the tool when its shape becomes irregular, its abrasive efficiency decreases or additional pressure is required to achieve the same result.

How many polishers are included in the box?

Each package contains a box of 100 Edenta Steelprofi green cylindrical rubber polishers.

This professional packaging is suitable for dental laboratories regularly finishing and polishing non-precious metal restorations.

Edenta green cylindrical rubber polisher for precise and consistent metal finishing

The Edenta Steelprofi green cylindrical rubber polisher 1423UM is a professional solution for polishing non-precious dental alloys in dental laboratories.

Its medium grit, cylindrical shape, high-quality rubber composition and compatibility with a 2.35 mm shank mandrel help remove fine scratches, smooth metal surfaces and prepare restorations for refined finishing before final high-gloss polishing.

Supplied in a box of 100 pieces, it is a reliable consumable for regular finishing procedures on cobalt-chromium removable partial denture frameworks, Co-Cr alloys, metal substructures, crowns and bridges.

Edenta Steelprofi Green Cylindrical Polisher – Co-Cr 1423UM-100
24/7 customer service

infos@massiliadental.com

Secure payments

Paypal - CB - Amex - Transfer

LIVRAISON GRATUITE

A partir de 195 € en Métropole

Warranty 1 to 3 years old

Depending on the brand of the material