Edenta Cerapro Tapered Diamond Bur for Zirconia and Dental Ceramics
Earn 21 loyalty points
Référence: 8002.040HP
Livraison gratuite dès 198 €*
Paiement sécurisé - SSL
Livraison 24/48 h en France
Livraison 2 à 5 jours Europe
Paiement par virement
Paiement par chèque*
Paiement en 3 fois**
** Pour un achat de 300 à 1100 € en France (Choix dans le panier) - *Uniquement en France
Edenta Cerapro Tapered Bur 8002.040HP
Tapered Cerapro diamond bur designed for pre-contouring and shaping of dental ceramics and zirconia in the dental laboratory.
- Fast trimming of all-ceramic restorations (ZrO₂, e.max, porcelain).
- Efficient abrasion with precise control of occlusal and vestibular surfaces.
- HP shank compatible with standard laboratory micromotors.
- Brand: Edenta.
- Manufacturer reference: 8002.040HP.
- SKU: H16199.
- Indicative price (incl. VAT): €21.95.
Tapered Cerapro Bur for Modern Dental Ceramics
The Edenta Cerapro tapered bur 8002.040HP is specifically developed for trimming zirconia and dental ceramics in professional dental laboratories. Its tapered geometry allows optimal access to vestibular, palatal and occlusal surfaces during crown and bridge shaping.
The high-performance diamond coating ensures fast, controlled material removal while limiting heat generation, protecting ceramic structures from micro-cracks.
Cerapro – Dental Applications
- Trimming zirconia (ZrO₂) and pressed ceramic restorations.
- Shaping occlusal and vestibular surfaces prior to finishing.
- Contour adjustment of all-ceramic crowns and bridges.
- Occlusal correction before glazing.
- Laboratory work on CAD/CAM ceramic restorations.
Cerapro Bur – Laboratory Benefits
- Efficient abrasion to save time during pre-contouring.
- Tapered Ø 4 mm shape for precise contour control.
- HP shank compatible with most laboratory micromotors.
- Consistent and fine material removal on ceramics and zirconia.
- Ideal solution for dental ceramic restorations.
Recommended Instructions for Use
- Mount the Cerapro tapered bur 8002.040HP on a suitable laboratory micromotor (HP shank).
- Work with light, even pressure, allowing the diamond coating to perform the abrasion.
- Use an appropriate rotational speed for ceramics and zirconia to limit overheating.
- Apply cross-strokes for uniform shaping of the surfaces.
- Finish with finer diamond burs or ceramic polishers for surface refinement.
- Regularly check bur condition and replace it if wear or reduced efficiency is observed.
Technical Specifications
| Brand | Edenta |
|---|---|
| Manufacturer reference | 8002.040HP |
| SKU | H16199 |
| Type | Cerapro tapered diamond bur for ceramics |
| Materials | Zirconia, dental ceramics, e.max, porcelain |
| Shape | Tapered |
| Shank | HP (laboratory micromotor) |
| Head diameter | Ø 4 mm |
| Use | Pre-contouring, shaping, ceramic adjustment |
| Indicative price | €21.95 per bur |
Cerapro Bur – Laboratory Tip
To preserve ceramic and zirconia integrity, combine this Cerapro tapered bur with adequate cooling (air/water or regular pauses). Avoid excessive pressure to reduce micro-crack risk and extend bur lifespan.
Delivery & Packaging
- Packaging: 1 Edenta Cerapro tapered bur 8002.040HP.
- HP shank, ready for use on laboratory micromotors.
- Protective packaging to prevent diamond damage before use.
FAQ – Edenta Cerapro Tapered Bur
Which materials is the Cerapro 8002.040HP bur designed for?
The Cerapro tapered bur is intended for dental ceramic trimming.
It is suitable for zirconia (ZrO₂), pressed ceramics such as e.max, and veneering porcelains.
It is used during pre-contouring and adjustment stages prior to finishing and polishing.
Can this bur be used intraorally?
No.
The 8002.040HP is a laboratory HP shank bur.
It is designed for use on laboratory micromotors outside the mouth.
It is intended for shaping ceramic restorations before clinical try-in and cementation.
How can the lifespan of the Cerapro bur be extended?
Always apply light pressure during use.
Work at appropriate speeds for ceramics and zirconia.
Ensure sufficient cooling to limit heat generation.
Avoid prolonged contact in the same area and clean the bur regularly to remove ceramic debris.
Is a different bur required for finishing and polishing?
Yes.
The Cerapro tapered bur is ideal for the pre-contouring phase.
For final surface finishing and high gloss, finer grit burs and dedicated ceramic polishers are recommended.
Edenta Cerapro Tapered Diamond Bur for Zirconia and Dental Ceramics