Multilingual operating manual covering initial setup, equipment settings, safety instructions and routine maintenance.
Dreve Polymax 1 dental pressure polymerizer 95°C – Red or silver
Earn 2 loyalty points
Référence: 3429
European delivery depending on destination
Secure payment by credit or debit card
Secure payment with PayPal
PayPal may offer Pay in 3 if the customer and purchase are eligible
Credit / debit card
PayPal
Bank transfer
* Instalment payment may be offered by PayPal subject to customer and purchase eligibility. Available options may vary depending on the PayPal account.
Brand: Dreve
SKU: 3429
Polymax 1
95 °C
2.2 L chamber
Dreve Polymax 1 95 °C – Dental Pressure Polymerizer for Dental Resins
The Dreve Polymax 1 95 °C is a dental pressure polymerizer designed for dental laboratories seeking to improve the polymerization quality of acrylic resins, self-curing resins, heat-curing resins, denture repairs and removable prosthetic appliances.
With its 2.2-litre chamber, continuously adjustable temperature up to 95 °C and operating pressure adjustable from 3 to 4.2 bar, it helps produce denser, more homogeneous and more consistent resin components.
Temperature
Continuously adjustable up to 95 °C
Pressure
3 to 4.2 bar for improved resin density
Chamber
Convenient 2.2-litre capacity
Dental Resins
Removable prostheses, repairs and laboratory applications
A Dental Pressure Polymerizer Designed to Improve Resin Quality
In a dental laboratory, polymerization quality directly influences the finishing, stability and reliability of resin-based prosthetic appliances. Inadequately polymerized resin may exhibit porosity, reduced surface strength, poorly controlled shrinkage or require additional finishing procedures.
The Dreve Polymax 1 addresses these requirements by combining pressure, temperature and cycle time in a compact, robust and easy-to-operate unit.
It enables dental technicians to standardise polymerization protocols and achieve more consistent results in everyday laboratory applications, including denture repairs, relining procedures, removable prostheses, splints, resin appliances and other work requiring a denser, more homogeneous material structure.
Why Pressure Polymerization Matters in Dental Prosthetics
Pressure polymerization is an important processing method for many dental resin applications. By maintaining stable pressure throughout the curing cycle, the Polymax 1 helps minimise air bubbles, improve material density and achieve a cleaner surface after polymerization.
This level of control is particularly valuable for removable dentures, repairs, splints, denture bases, temporary restorations and appliances requiring an accurate aesthetic finish. Properly polymerized resin is generally easier to trim, finish and polish, while providing a more consistent material structure.
Reduced Porosity
Pressure helps minimise internal microbubbles and visible defects after finishing, particularly in thin or translucent areas.
Improved Material Density
The combination of heat and pressure promotes a more homogeneous resin structure with greater consistency and improved handling characteristics.
Cleaner Surface Finishing
Better-controlled polymerization facilitates trimming, grinding, polishing and final finishing of resin-based dental prostheses.
Achieve Stable, Consistent and Reproducible Resin Results
Dental laboratories require consistent and reproducible results. Excessive variations between polymerization cycles can lead to porosity, additional adjustments, irregular surfaces, less reliable fitting and longer polishing procedures.
The Polymax 1 95 °C addresses these challenges through a stable pressure chamber, adjustable temperature and a timer that allows technicians to control curing cycles more accurately.
Generous Chamber Capacity for Convenient Loading
Its approximately 2.2-litre chamber, measuring 160 mm in diameter and 110 mm in depth, can accommodate larger dental appliances or multiple components, depending on the selected processing protocol.
This capacity improves everyday laboratory convenience, particularly when several resin components need to be polymerized or when a dental appliance requires additional space inside the chamber.
Dreve Polymax 1 Applications in Dental Laboratories
The Dreve Polymax 1 95 °C supports the main pressure polymerization procedures used for heat-curing and cold-curing dental resins, provided that the processing parameters comply with the material manufacturer's instructions.
Removable Dental Prostheses
Pressure polymerization of resin denture bases helps achieve a more homogeneous structure and a cleaner surface finish.
Denture Repairs
For repairs, relining procedures and resin additions, pressure helps reduce air bubbles and improve the density of the repaired area.
Heat-Curing and Cold-Curing Resins
Adjustable temperatures up to 95 °C allow the curing cycle to be adapted to dental resins compatible with pressure polymerization protocols.
Splints and Dental Appliances
The Polymax 1 can be used for applications requiring stable, dense and homogeneous dental resin components.
Temporary Restorations
Consistent curing conditions help produce more homogeneous temporary resin components that are easier to finish.
Repetitive Laboratory Production
The timer and pressure monitoring system facilitate the reproduction of consistent polymerization cycles from one job to another.
Benefits of the Dreve Polymax 1 for Dental Technicians
The Dreve Polymax 1 provides a reliable solution for standardising resin curing procedures and improving the quality of pressure-polymerized dental appliances.
- More consistent cycles: timer adjustable up to 90 minutes to help standardise polymerization protocols.
- Improved material quality: operating pressure from 3 to 4.2 bar promotes denser, more homogeneous resin.
- More efficient finishing: smoother, more consistent surfaces can reduce the need for additional trimming and polishing.
- Generous working capacity: 2.2-litre chamber provides convenient loading space.
- Operational safety: automatic locking mechanism, pressure gauge and indicator light.
- Robust construction: aluminium chamber, stainless steel lid and high-strength housing.
- Dreve manufacturing quality: an established range of professional dental laboratory polymerization equipment.
Dreve Polymax 1 Product Presentation Video
Dreve Polymax 1 95 °C Technical Specifications
| Product | Dreve Polymax 1 95 °C Dental Pressure Polymerizer |
|---|---|
| Brand | Dreve |
| Model | Polymax 1 |
| Product Reference / SKU | 3429 |
| Equipment Type | Pressure polymerizer for dental resins |
| Temperature | Continuously adjustable from 0 to 95 °C |
| Operating Pressure | Adjustable from 3 to 4.2 bar |
| Recommended Minimum Pressure | Above 2.5 bar, depending on operating conditions |
| Timer | Up to 90 minutes |
| Chamber Capacity | Approximately 2.2 litres |
| Chamber Dimensions | 160 mm diameter – 110 mm depth |
| Loading Capacity | Depending on configuration: compatible articulator, Castdon flask or brass flask with clamping frames |
| Equipment Dimensions | Approximately 23 × 29 × 33 cm |
| Weight | Approximately 10 kg |
| Electrical Supply | 115 / 230 V – 50 / 60 Hz |
| Power Consumption | Approximately 450 W |
| Construction | Aluminium chamber, stainless steel lid and high-strength housing |
| Safety Features | Automatic locking mechanism, pressure gauge and indicator light |
| Applications | Heat-curing and cold-curing dental resins, repairs, removable prostheses and dental laboratory applications |
How to Use the Polymax 1 for Reliable Polymerization Cycles
The Polymax 1 must be operated according to the resin manufacturer's recommendations. Each material may require specific curing times, temperatures and pressure settings. The equipment allows dental laboratories to follow these parameters with greater consistency.
Follow the Resin Manufacturer's Protocol
Before each cycle, check the recommended polymerization temperature and curing time for the dental resin being processed.
Monitor Operating Pressure
Pressure must remain sufficient and stable to achieve the intended effect on the resin. The pressure gauge allows technicians to monitor operating conditions easily.
Maintain the Lid Gasket
A clean and correctly lubricated sealing gasket helps maintain chamber airtightness and stable conditions throughout the polymerization cycle.
Replace Chamber Water Regularly
Clean water helps prevent contamination and mineral deposits while supporting the proper operation of the equipment.
Documents and Technical Resources for the Dreve Polymax 1
Manufacturer conformity documentation for technical equipment records, traceability and internal dental laboratory quality control procedures.
Compare the Polymax 1 with Other Dreve Pressure Polymerizers
The Dreve Polymax range allows dental laboratories to select a pressure polymerizer according to operating temperature, chamber capacity, frequency of use and the types of dental appliances produced.
The Polymax 1 95 °C is a suitable choice for laboratories seeking a spacious chamber, straightforward operation and reliable pressure polymerization for conventional dental resins.
Explore the Polymax Pressure Polymerizers and Light-Curing Units Collection
Recommended Complementary Products
Delivery, Installation and Maintenance of the Dreve Polymax 1
Supplied equipment: 1 Dreve Polymax 1 95 °C pressure polymerizer for dental resin processing.
- Install on a stable work surface with a suitable electrical supply.
- Connect to a compressed air supply that meets the equipment's operating requirements.
- Regularly inspect the lid gasket, operating pressure and water level.
- Clean the chamber gently to preserve equipment performance and service life.
- Always follow the polymerization protocols specified by the dental resin manufacturers.
FAQ – Dreve Polymax 1 95 °C Dental Pressure Polymerizer
What is the Dreve Polymax 1 used for in a dental laboratory?
The Dreve Polymax 1 is used for the pressure polymerization of dental resins. It helps improve the quality of resin-based dental appliances, including removable dentures, denture repairs, relining procedures, splints and various laboratory-fabricated appliances.
Its main function is to combine three essential processing parameters: temperature, pressure and curing time. This combination helps produce denser, more homogeneous resin structures with reduced porosity.
What are the benefits of pressure polymerization for dental resins?
Pressure polymerization helps reduce microbubbles and porosity within dental resins. When stable pressure is maintained throughout the curing cycle, the material develops a more homogeneous and consistent structure.
These improvements are particularly noticeable during finishing procedures. The surface is generally cleaner, polishing becomes easier and internal defects are less visible. For removable denture fabrication and repair procedures, this consistency helps laboratories produce more reliable appliances that are easier to inspect and finish.
Is the Dreve Polymax 1 95 °C suitable for heat-curing and cold-curing resins?
Yes. The Dreve Polymax 1 95 °C can be used for various heat-curing and cold-curing dental resin protocols, provided that the processing conditions comply with the material manufacturer's instructions.
Its continuously adjustable temperature range from 0 to 95 °C allows dental technicians to select suitable processing conditions for self-curing resins, heat-curing resins and other materials requiring controlled pressure polymerization.
Why choose the Polymax 1 instead of a basic resin polymerization unit?
The Dreve Polymax 1 is designed for dental laboratories requiring a more stable and professional solution than a basic polymerization unit. Its pressure chamber, timer, pressure gauge and automatic locking mechanism provide improved control over curing cycles.
This control is particularly important for repetitive laboratory procedures, as it helps minimise variations between successive polymerization cycles. Dental laboratories benefit from greater consistency, improved operational safety and more convenient daily use.
How should the Dreve Polymax 1 be maintained to extend its service life?
Routine maintenance of the Polymax 1 mainly involves checking the chamber, lid gasket, water level and compressed air supply. The chamber should remain clean to prevent contamination and the accumulation of deposits.
The lid gasket is an essential component for maintaining pressure sealing. It should be inspected regularly, cleaned carefully and lubricated using a suitable grease. A dry, damaged or contaminated gasket may cause pressure loss or reduce the effectiveness of the locking and sealing system.
Is the Polymax 1 suitable for regular production in a dental laboratory?
Yes. The Polymax 1 is suitable for regular use in professional dental laboratories. Its robust construction, aluminium chamber, stainless steel lid, automatic locking system and timer make it appropriate for repeated pressure polymerization cycles.
It helps dental technicians organise resin-based procedures more efficiently and standardise curing protocols. This consistency is valuable when producing multiple denture repairs, removable prostheses or resin appliances requiring a reliable and uniform level of finishing quality.
A Reliable Dental Pressure Polymerizer for Consistent Resin Processing
The Dreve Polymax 1 95 °C is a professional solution for dental laboratories seeking to improve the quality, density and consistency of their dental resin appliances.
Its adjustable temperature up to 95 °C, operating pressure from 3 to 4.2 bar, 2.2-litre chamber, timer of up to 90 minutes and robust construction make it suitable for repeated pressure polymerization cycles.
For denture repairs, removable prostheses, heat-curing and cold-curing resins, and other dental laboratory applications requiring a more homogeneous material structure, the Dreve Polymax 1 provides reliable performance, precise processing control and straightforward daily operation.
Dreve Polymax 1 dental pressure polymerizer 95°C – Red or silver