Cyanolit fast-setting cyanoacrylate adhesive for dental laboratories
Référence: 1500.0030
Cyanolit adhesive – fast-setting cyanoacrylate for dental laboratory use
The Cyanolit adhesive is a fast-setting cyanoacrylate glue, simple, efficient and cost-effective, designed for routine bonding procedures in the dental laboratory on plaster, resin, plastics and cardboard.
Workshop tip
To accelerate curing time in certain procedures, you can combine it with a cyano activator: CyanoMD.
Lab tip
Key advantages of Cyanolit cyanoacrylate adhesive
- Compatible with plaster, cardboard and many plastics.
- Very fast setting to save time on assembly and repair procedures.
- Excellent cost-performance ratio for everyday laboratory use.
- Two practical formats: 20 g for occasional use or 50 g for intensive workflows.
User testing
Reliable results have been observed in routine bonding applications, with or without activator, depending on substrate type, fit accuracy and mechanical stress requirements.
Applications & instructions – fast bonding in dental labs
Dental applications
- Minor bonding on plaster models: repairs, repositioning, stabilization.
- Assembly and repair on resin materials, depending on compatibility.
- Temporary fixation on plastics and working supports.
For optimal bonding results, ensure surfaces are clean, dry, well-fitted and maintained under pressure during curing.
Recommended instructions for use
- Prepare the surfaces: remove dust, degrease if necessary, and dry thoroughly.
- Apply a small amount of adhesive, preferably in a thin film.
- Assemble immediately and hold in position for a few seconds.
- Optionally, use a cyano activator such as CyanoMD to accelerate curing.
Always perform a preliminary test on a sample to validate compatibility with specific plastics or resins.
Safety precautions – cyanoacrylate adhesive
- Wear eye protection and work in a well-ventilated area.
- The adhesive bonds instantly to skin: in case of significant contact, seek medical advice.
- Keep out of reach of children.
Related products
Technical specifications – Cyanolit adhesive
| Item | Detail |
|---|---|
| Type | Cyanoacrylate adhesive – fast setting |
| Substrates | Plaster, cardboard, plastics, resin depending on compatibility |
| Formats | 20 g or 50 g bottle |
| Reference / SKU | 1500.0030 |
| Use | Assembly, repair, positioning and fast bonding in dental laboratory workflows |
Delivery
1 bottle supplied: 20 g or 50 g.
FAQ – Cyanolit adhesive
Which materials does Cyanolit adhesive work best on?
This cyanoacrylate adhesive is highly effective for fast bonding on plaster, cardboard and many plastics.
For resin materials, performance depends on the specific substrate and surface condition; preliminary testing is recommended.
Should I use an activator with cyanoacrylate adhesive?
Not necessarily. Cyanolit is designed for fast curing.
However, a cyano activator such as CyanoMD can further accelerate bonding depending on working conditions.
How can I avoid overflow or whitening of the bonded area?
Apply a minimal amount in a thin film, maintain pressure and avoid excessive activator use.
Over-application may lead to excess buildup, overflow or whitening on certain materials.
What safety precautions should be followed?
Wear eye protection, avoid skin contact and keep out of reach of children.
In case of projection or significant contact, seek medical advice.
Cyanolit fast-setting cyanoacrylate adhesive for dental laboratories