Cyanolit fast-setting cyanoacrylate glue – 20 g and 50 g
Référence: 1500.0030
Cyanolit Glue – fast-setting cyanoacrylate (20 g / 50 g)
A simple, fast and cost-effective cyanoacrylate glue for daily lab bonding: plaster, resin, plastic (and cardboard).
Workshop tip
To speed up curing on certain operations, you can use a cyanoacrylate activator: CyanoMD.
Lab checklist
Key benefits of Cyanolit cyanoacrylate glue
- Suitable for plaster, cardboard and many plastics.
- Very fast curing to save time during assemblies and repairs.
- Excellent value for money for everyday laboratory use.
- Two practical formats: 20 g (compact) or 50 g (economy).
User tests
Excellent results were observed on typical bonding tasks, with or without activator, depending on the substrate and the mechanical stress.
Applications & instructions – fast lab bonding
Dental lab applications (examples)
- Quick bonding on plaster models (small repairs, repositioning, shimming).
- Assemblies and repairs on resins (depending on material compatibility).
- Temporary fixing on plastics and work supports.
For a clean bond: surfaces must be clean, dry, and held firmly during curing.
Recommended use
- Prepare the surfaces: remove dust, degrease if needed, dry thoroughly.
- Apply a small amount of glue (thin film recommended).
- Assemble immediately and keep pressure for a few seconds.
- Optional: spray a cyano activator (e.g. Cyano MD) to accelerate curing.
Test on a sample piece first to confirm compatibility with certain plastics or specific resins.
Precautions – cyanoacrylate
- Wear eye protection and work in a ventilated area.
- Bonds skin instantly: in case of contact, seek medical advice.
- Keep out of reach of children.
Complementary products
Technical specifications – Cyanolit Glue
| Item | Details |
|---|---|
| Type | Cyanoacrylate glue (fast setting) |
| Substrates | Plaster, cardboard, plastic, resin (depending on compatibility) |
| Formats | Bottle 20 g or 50 g |
| Reference / SKU | 1500.0030 |
| Price | From €8.95 |
Shipping
1 bottle: 20 g or 50 g (your choice).
FAQ – Cyanolit Glue (cyanoacrylate)
Which materials does Cyanolit glue work best on?
This cyanoacrylate glue is ideal for fast lab bonding on plaster, cardboard and many plastics. For resin, performance depends on the specific resin and surface condition; a quick test on a sample piece is recommended. Very smooth, dusty or greasy surfaces reduce adhesion—cleaning and thorough drying significantly improve results.
Do I need an activator with cyanoacrylate glue?
Not necessarily. Cyanolit is designed for fast setting. However, a cyano activator (such as CyanoMD) can be useful when you want an even quicker “flash” cure or when conditions are less favorable (low-absorbency surfaces, reduced holding time). Use sparingly for the cleanest finish.
How can I prevent overflow or “white bloom” around the bond?
Apply a minimal amount—typically a thin film bonds better than excess. Hold parts firmly without movement while curing. Work on dry surfaces and avoid flooding the joint. If using an activator, a light spray is enough; over-application can increase deposits and reduce aesthetics.
What essential precautions should I follow with cyanoacrylate?
Wear eye protection and avoid skin contact—cyanoacrylate bonds instantly. Work in a ventilated area and close the bottle after use. In case of significant skin contact or splashes, follow safety recommendations and seek medical advice. Keep out of reach of children.