{"product_id":"ta-clean-whitepeaks-nettoyage-four-frittage-zircone","title":"TA-Clean Whitepeaks cleaning beads for zirconia sintering furnaces","description":"\u003c!-- ========================================================= --\u003e\n\u003c!-- MASSILIA DENTAL STUDIO --\u003e\n\u003c!-- DESIGN : MILA PREMIUM 2026 --\u003e\n\u003c!-- VERSION : MDP v1.0 --\u003e\n\u003c!-- PRODUCT : TA-Clean Whitepeaks --\u003e\n\u003c!-- ========================================================= --\u003e\n\u003cdiv id=\"md-product\" class=\"md-product mdp-product mila-premium-2026\"\u003e\n    \u003c!-- CHAPTER 1 — HERO --\u003e\n    \u003csection class=\"mdp-section mdp-hero\"\u003e\n    \u003cdiv class=\"mdp-card mdp-visual\"\u003e\n        \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0476\/7776\/7838\/files\/ta-clean-whitepeaks.jpg?v=1789596403\" alt=\"TA-Clean Whitepeaks cleaning material for zirconia sintering furnace in dental laboratory\" loading=\"lazy\"\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"mdp-card mdp-hero-content\"\u003e\n        \u003cdiv class=\"mdp-badges\"\u003e\n            \u003cspan class=\"mdp-chip\"\u003eBrand: Whitepeaks\u003c\/span\u003e\u003cspan class=\"mdp-chip\"\u003eTA-Clean\u003c\/span\u003e\u003cspan class=\"mdp-chip\"\u003eZirconia furnace cleaning\u003c\/span\u003e\u003cspan class=\"mdp-chip\"\u003e30 g \/ 200 g\u003c\/span\u003e\u003cspan class=\"mdp-chip\"\u003eAfter 10 cycles\u003c\/span\u003e\n        \u003c\/div\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eTA-Clean Whitepeaks – high-performance cleaning material for zirconia sintering furnaces\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            \u003cstrong\u003eTA-Clean Whitepeaks\u003c\/strong\u003e is a cleaning material specially designed for \u003cstrong\u003ezirconium oxide sintering furnaces\u003c\/strong\u003e. It helps remove impurities that build up inside the furnace chamber during zirconia sintering cycles.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Regular use helps preserve furnace cleanliness, sintering result stability and the aesthetic quality of zirconia restorations, especially when the laboratory uses different zirconia generations or colouring liquids.\n        \u003c\/p\u003e\n        \u003cdiv class=\"mdp-mini-grid\"\u003e\n            \u003cdiv class=\"mdp-mini-card\"\u003e\n                \u003cstrong\u003eZirconia furnace\u003c\/strong\u003e\n                Cleaning of ZrO₂ sintering furnaces\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-mini-card\"\u003e\n                \u003cstrong\u003eReliable results\u003c\/strong\u003e\n                Helps limit shade variations\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-mini-card\"\u003e\n                \u003cstrong\u003eRegular use\u003c\/strong\u003e\n                Recommended after every 10th cycle\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-mini-card\"\u003e\n                \u003cstrong\u003eSingle use\u003c\/strong\u003e\n                Beads for one-time use only\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 2 — INTRODUCTION --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card mdp-soft\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eEssential cleaning to stabilise zirconia sintering results\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            A zirconia sintering furnace gradually accumulates impurities. These contaminants may come from zirconia dust, repeated cycles, colouring liquids, previous generations of materials or residues present inside the furnace chamber.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            These deposits can influence results after sintering. The manufacturer states that furnace contamination may cause unpredictable changes in \u003cstrong\u003etranslucency\u003c\/strong\u003e and \u003cstrong\u003eshade\u003c\/strong\u003e, with whitish, opaque, green or yellow discoloration.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            \u003cstrong\u003eTA-Clean\u003c\/strong\u003e enables a dedicated cleaning cycle designed to capture impurities present inside the furnace and restore a cleaner sintering environment for zirconium oxide restorations.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 3 — APPLICATIONS \/ BENEFITS --\u003e\n    \u003csection class=\"mdp-section mdp-grid-2\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eApplications in the dental laboratory\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            TA-Clean is intended for laboratories that regularly produce sintered zirconia restorations.\n        \u003c\/p\u003e\n        \u003cul\u003e\n            \u003cli\u003eCleaning of zirconium oxide sintering furnaces.\u003c\/li\u003e\n            \u003cli\u003eRemoval of impurities formed during sintering cycles.\u003c\/li\u003e\n            \u003cli\u003ePreventive maintenance of the furnace chamber.\u003c\/li\u003e\n            \u003cli\u003eStabilisation of shade and translucency results.\u003c\/li\u003e\n            \u003cli\u003eCleaning after frequent use of colouring liquids.\u003c\/li\u003e\n            \u003cli\u003eCleaning after sintering different generations of zirconia.\u003c\/li\u003e\n            \u003cli\u003ePrevention of unwanted discoloration on sintered restorations.\u003c\/li\u003e\n            \u003cli\u003eQuality control before demanding aesthetic cases.\u003c\/li\u003e\n        \u003c\/ul\u003e\n    \u003c\/div\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eBenefits for the laboratory\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            A clean furnace is essential for achieving consistent results with modern zirconia materials, especially high-translucency, multilayer or aesthetic zirconia.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            TA-Clean helps reduce the risk of cross-contamination between different materials. It is particularly useful when the laboratory runs repeated cycles with different zirconia materials or colouring liquids.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Regular use also contributes to furnace longevity by limiting impurity build-up inside the sintering chamber.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 4 — TECHNICAL BENEFITS --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eTechnical benefits of TA-Clean\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            TA-Clean acts as a dedicated cleaning consumable for zirconia sintering furnaces. It is used with an alumina crucible during a specific thermal cleaning cycle.\n        \u003c\/p\u003e\n        \u003cdiv class=\"mdp-grid-2\"\u003e\n            \u003cdiv class=\"mdp-card\"\u003e\n                \u003ch2\u003e\n                    \u003cstrong\u003eFurnace cleanliness\u003c\/strong\u003e\n                \u003c\/h2\u003e\n                \u003cul\u003e\n                    \u003cli\u003eRemoves impurities generated during the sintering process.\u003c\/li\u003e\n                    \u003cli\u003eHelps decontaminate the furnace chamber.\u003c\/li\u003e\n                    \u003cli\u003eReduces deposits caused by repeated cycles.\u003c\/li\u003e\n                    \u003cli\u003eLimits contamination after use of colouring liquids.\u003c\/li\u003e\n                    \u003cli\u003eContributes to preventive furnace maintenance.\u003c\/li\u003e\n                \u003c\/ul\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-card\"\u003e\n                \u003ch2\u003e\n                    \u003cstrong\u003eRestoration quality\u003c\/strong\u003e\n                \u003c\/h2\u003e\n                \u003cul\u003e\n                    \u003cli\u003eHelps maintain more consistent shade results.\u003c\/li\u003e\n                    \u003cli\u003eLimits unpredictable translucency variations.\u003c\/li\u003e\n                    \u003cli\u003eReduces the risk of opaque, green or yellow discoloration.\u003c\/li\u003e\n                    \u003cli\u003eHelps secure aesthetic zirconia cases.\u003c\/li\u003e\n                    \u003cli\u003eContributes to more reliable sintering results.\u003c\/li\u003e\n                \u003c\/ul\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 5 — WHY CLEAN A ZIRCONIA SINTERING FURNACE --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card mdp-soft\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eWhy clean a zirconia sintering furnace regularly?\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            Zirconia is highly sensitive to contamination during sintering. Even minor impurities inside the furnace chamber can influence the final appearance, especially on light shades, multilayer zirconia or highly translucent restorations.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Colouring liquids, dust, material residues and successive cycles can gradually contaminate the furnace. This contamination may result in restorations that appear less bright, more opaque or affected by unwanted discoloration.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Regular cleaning with TA-Clean helps maintain a cleaner thermal environment and reduce the risk of furnace-related aesthetic defects.\n        \u003c\/p\u003e\n        \u003cp class=\"mdp-note\"\u003e\n            Key point: when zirconia restorations come out with an abnormal shade, reduced translucency or yellowish, greenish or opaque reflections, the furnace and sintering accessories should be checked and cleaned.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 6 — WHEN TO USE TA-CLEAN --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eWhen should TA-Clean be used?\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            The manufacturer recommends regular use to obtain reliable and consistent sintering results. The instructions for use recommend cleaning after every \u003cstrong\u003e10th sintering cycle\u003c\/strong\u003e.\n        \u003c\/p\u003e\n        \u003cdiv class=\"mdp-grid-3\"\u003e\n            \u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eAfter 10 cycles\u003c\/strong\u003e\n            \u003cp\u003e\n                Regular use is recommended after every tenth sintering cycle to keep the furnace clean.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eAfter colouring liquids\u003c\/strong\u003e\n            \u003cp\u003e\n                Recommended when the laboratory frequently uses colouring liquids before sintering.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eAfter changing zirconia material\u003c\/strong\u003e\n            \u003cp\u003e\n                Useful after sintering different generations or families of zirconium oxide materials.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 7 — COMPLETE INSTRUCTIONS FOR USE --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eTA-Clean instructions for use\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            TA-Clean is used in the form of cleaning beads placed in an \u003cstrong\u003ealumina crucible\u003c\/strong\u003e. The crucible is then placed inside the furnace to run a dedicated cleaning cycle.\n        \u003c\/p\u003e\n        \u003cdiv class=\"mdp-steps\"\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    1 - \u003cstrong\u003ePrepare the crucible: \u003c\/strong\u003ePour approximately \u003cstrong\u003e10 g of TA-Clean cleaning beads\u003c\/strong\u003e into a clean alumina crucible.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    2 - \u003cstrong\u003ePlace inside the furnace: \u003c\/strong\u003ePlace the crucible containing the cleaning beads inside the zirconium oxide sintering furnace.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    3 - \u003cstrong\u003eStart the cleaning cycle: \u003c\/strong\u003eProgram the furnace for a cleaning cycle according to the specified parameters: heating ramp, holding stage and controlled cooling.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    4 - \u003cstrong\u003eHeating: \u003c\/strong\u003eHeat at \u003cstrong\u003e55 °C\/min\u003c\/strong\u003e up to \u003cstrong\u003e1,000 °C\u003c\/strong\u003e, then hold at 1,000 °C for \u003cstrong\u003e20 minutes\u003c\/strong\u003e.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    5 - \u003cstrong\u003eCooling: \u003c\/strong\u003eCool at \u003cstrong\u003e40 °C\/min\u003c\/strong\u003e down to \u003cstrong\u003e300 °C\u003c\/strong\u003e, then allow the furnace to continue cooling before handling.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    6 - \u003cstrong\u003eRemove the crucible: \u003c\/strong\u003eAllow the furnace to cool, then carefully remove the crucible. Use suitable tools if the crucible is still hot.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    7 - \u003cstrong\u003eCheck the beads: \u003c\/strong\u003eDiscoloration of the beads indicates that cleaning has been effective and that impurities were captured during the cycle.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n            \u003cdiv class=\"mdp-step\"\u003e\n                \u003cdiv class=\"mdp-step-number\"\u003e\n                    8 - \u003cstrong\u003eDispose of after use: \u003c\/strong\u003eTA-Clean cleaning beads are for \u003cstrong\u003esingle use only\u003c\/strong\u003e. Do not reuse them for a second cycle.\n                \u003c\/div\u003e\n            \u003c\/div\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 8 — CLEANING CYCLE PROGRAM --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eCleaning cycle program\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cdiv class=\"mdp-table-wrap\"\u003e\n            \u003ctable\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Step\n                        \u003c\/th\u003e\n                        \u003cth\u003e\n                            Parameter\n                        \u003c\/th\u003e\n                        \u003cth\u003e\n                            Value\n                        \u003c\/th\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Quantity\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            TA-Clean beads in alumina crucible\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Approximately 10 g\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Temperature ramp-up\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Heating rate\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            55 °C\/min\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Target temperature\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Cleaning holding stage\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            1,000 °C\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Holding time\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Hold at 1,000 °C\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            20 minutes\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Cooling\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Cooling rate\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            40 °C\/min\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            End-of-program temperature\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Controlled cooling down to\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            300 °C\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Recommended frequency\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Regular maintenance\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            After every 10th sintering cycle\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Reuse\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Cleaning beads\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Single use only\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 9 — SIGNS OF A CONTAMINATED FURNACE --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card mdp-soft\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eWhat are the signs of a contaminated sintering furnace?\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            A contaminated furnace is not always immediately visible. The first sign may appear directly on sintered restorations: unstable shade, reduced brightness or translucency that differs from the expected result.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            The most common defects mentioned by the manufacturer are unpredictable changes in translucency and shade, with whitish opaque, green or yellow discoloration.\n        \u003c\/p\u003e\n        \u003cdiv class=\"mdp-grid-3\"\u003e\n            \u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eMore opaque zirconia\u003c\/strong\u003e\n            \u003cp\u003e\n                The restoration appears less translucent than expected, despite using the usual sintering protocol.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eYellow or green discoloration\u003c\/strong\u003e\n            \u003cp\u003e\n                Unwanted shade effects may appear when the furnace or accessories are contaminated.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eInconsistent results\u003c\/strong\u003e\n            \u003cp\u003e\n                Two similar restorations may come out with unexpected differences in shade or brightness.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 10 — PRECAUTIONS FOR USE --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003ePrecautions for use\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            TA-Clean is intended for cleaning zirconia sintering furnaces. It must be used according to the recommended cleaning cycle program and with a suitable crucible.\n        \u003c\/p\u003e\n        \u003cul\u003e\n            \u003cli\u003eUse only in a compatible zirconium oxide sintering furnace.\u003c\/li\u003e\n            \u003cli\u003ePour the beads into a clean alumina crucible.\u003c\/li\u003e\n            \u003cli\u003eDo not place the beads directly on the furnace floor.\u003c\/li\u003e\n            \u003cli\u003eDo not mix cleaning beads with sintering beads used for restorations.\u003c\/li\u003e\n            \u003cli\u003eDo not use TA-Clean beads to support zirconia restorations.\u003c\/li\u003e\n            \u003cli\u003eDo not reuse the beads after a cleaning cycle.\u003c\/li\u003e\n            \u003cli\u003eWait until the furnace has cooled before removing the crucible.\u003c\/li\u003e\n            \u003cli\u003eHandle the crucible carefully after the cycle.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"mdp-note\"\u003e\n            Safety point: cleaning beads are not standard sintering beads. They are used only for furnace cleaning and must be discarded after use.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 11 — WHAT TA-CLEAN IS NOT --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card mdp-soft\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eWhat TA-Clean is not\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            TA-Clean is a technical consumable for furnace maintenance. It must not be confused with a colouring liquid, glaze, manual cleaning product or restoration support accessory.\n        \u003c\/p\u003e\n        \u003cdiv class=\"mdp-grid-3\"\u003e\n            \u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eNot a colouring liquid\u003c\/strong\u003e\n            \u003cp\u003e\n                TA-Clean is not used to colour zirconia before sintering.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eNot a glaze\u003c\/strong\u003e\n            \u003cp\u003e\n                It is not applied to restorations and does not create a glossy surface.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eNot a support material\u003c\/strong\u003e\n            \u003cp\u003e\n                Cleaning beads must not be used as sintering beads to support restorations.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 12 — TECHNICAL SPECIFICATIONS --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eTechnical specifications\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cdiv class=\"mdp-table-wrap\"\u003e\n            \u003ctable\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Product\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            TA-Clean Whitepeaks\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Brand\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            Whitepeaks Dental Solutions\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Type\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            Cleaning material for zirconia sintering furnace\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Intended use\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            Zirconium oxide sintering furnaces\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Application\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            Removal of impurities formed during the sintering process\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Available packaging\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            30 g or 200 g depending on option\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Quantity per cycle\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            Approximately 10 g of cleaning beads\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Required accessory\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            Alumina crucible\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Cleaning program\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            55 °C\/min up to 1,000 °C, hold 20 min, cooling 40 °C\/min down to 300 °C\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Recommended frequency\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            After every 10th sintering cycle\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Reuse\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            No, single-use beads\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Status\n                        \u003c\/th\u003e\n                        \u003ctd\u003e\n                            Technical product, not a medical device according to the manufacturer\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 13 — FURNACE MAINTENANCE COMPARISON --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card mdp-soft\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eTA-Clean or simple manual furnace cleaning?\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            Manual cleaning can remove some visible dust from the furnace chamber, but it does not replace a thermal decontamination cycle with a material designed to capture impurities.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            \u003cstrong\u003eTA-Clean\u003c\/strong\u003e enables a dedicated cleaning cycle. The beads are placed in an alumina crucible and change colour when they have captured contamination, indicating that the cleaning process has been effective.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Both approaches can be complementary: regular visual furnace maintenance and a TA-Clean cycle according to the recommended frequency or as soon as shade defects appear.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 14 — COMPARISON TABLE --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eComparison: furnace without regular cleaning VS maintenance with TA-Clean\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cdiv class=\"mdp-table-wrap\"\u003e\n            \u003ctable\u003e\n                \u003ctbody\u003e\n                    \u003ctr\u003e\n                        \u003cth\u003e\n                            Criteria\n                        \u003c\/th\u003e\n                        \u003cth\u003e\n                            Furnace not cleaned regularly\n                        \u003c\/th\u003e\n                        \u003cth\u003e\n                            Maintenance with TA-Clean\n                        \u003c\/th\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Impurities in the chamber\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Risk of progressive build-up\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Dedicated cycle to help remove them\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Zirconia shade\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Risk of unpredictable variations\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Helps maintain a more consistent result\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Translucency\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            May be affected by contamination\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Improved stability of expected results\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Colouring liquids\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            May gradually contaminate the furnace\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Cleaning recommended in frequent use\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Quality control\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Defects may only become visible after sintering\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Preventive maintenance before aesthetic cases\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                    \u003ctr\u003e\n                        \u003ctd\u003e\n                            Frequency\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            Not controlled\n                        \u003c\/td\u003e\n                        \u003ctd\u003e\n                            After every 10th sintering cycle according to instructions for use\n                        \u003c\/td\u003e\n                    \u003c\/tr\u003e\n                \u003c\/tbody\u003e\n            \u003c\/table\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 15 — PRACTICAL LABORATORY RECOMMENDATIONS --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003ePractical recommendations for the laboratory\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            TA-Clean can be integrated into a regular furnace maintenance protocol. The laboratory can schedule a periodic cleaning cycle to avoid waiting until aesthetic defects appear on restorations.\n        \u003c\/p\u003e\n        \u003cul\u003e\n            \u003cli\u003ePlan cleaning after every 10th sintering cycle.\u003c\/li\u003e\n            \u003cli\u003eClean sooner if unwanted shade effects appear.\u003c\/li\u003e\n            \u003cli\u003eUse a clean alumina crucible dedicated to cleaning.\u003c\/li\u003e\n            \u003cli\u003eNever mix used beads with new beads.\u003c\/li\u003e\n            \u003cli\u003eDiscard the beads after one cycle, even if discoloration appears minimal.\u003c\/li\u003e\n            \u003cli\u003eRecord cleaning cycles in the furnace quality-control log.\u003c\/li\u003e\n            \u003cli\u003eAlso monitor the condition of sintering beads and firing accessories.\u003c\/li\u003e\n            \u003cli\u003eCheck restorations after cleaning to validate shade stability.\u003c\/li\u003e\n        \u003c\/ul\u003e\n        \u003cp class=\"mdp-note\"\u003e\n            Laboratory tip: creating a furnace maintenance schedule helps secure high-translucency zirconia cases, which are often more sensitive to visual contamination.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            \u003cstrong\u003eIMPORTANT:\u003c\/strong\u003e not suitable for microwave sintering furnaces.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 16 — COMPLEMENTARY PRODUCTS --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eRecommended complementary products\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cdiv class=\"mdp-grid-3\"\u003e\n            \u003carticle class=\"mdp-card mdp-related-card\"\u003e\u003ca href=\"https:\/\/www.massiliadental.com\/en\/products\/mestra-microwave-zirconia-sintering-furnace-dental-labs\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0476\/7776\/7838\/files\/four-sinterisation-micro-ondes-mestra-ferme.jpg?v=1760704029\" alt=\"Zirconia sintering furnace for dental laboratory\" loading=\"lazy\"\u003e\n            \u003ch3\u003e\n                \u003cstrong\u003eMicrowave zirconia sintering furnaces\u003c\/strong\u003e\n            \u003c\/h3\u003e\n            \u003c\/a\u003e\u003c\/article\u003e\u003carticle class=\"mdp-card mdp-related-card\"\u003e\u003ca href=\"https:\/\/www.massiliadental.com\/en\/products\/zirconia-sintering-beads-dental-laboratory\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0476\/7776\/7838\/files\/bille-zircone-1-mm.jpg?v=1772187839\" alt=\"Zirconia beads for tray sintering in dental laboratory\" loading=\"lazy\"\u003e\n            \u003ch3\u003e\n                \u003cstrong\u003eZirconia sintering beads\u003c\/strong\u003e\n            \u003c\/h3\u003e\n            \u003c\/a\u003e\u003c\/article\u003e\u003carticle class=\"mdp-card mdp-related-card\"\u003e\u003ca href=\"https:\/\/www.massiliadental.com\/en\/products\/zirconya-sinterization-cup-cover\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0476\/7776\/7838\/files\/coupelle-100-mm.jpg?v=1790434980\" alt=\"Infrared zirconia drying lamp for dental laboratory\" loading=\"lazy\"\u003e\n            \u003ch3\u003e\n                \u003cstrong\u003eZirconia sintering cup\u003c\/strong\u003e\n            \u003c\/h3\u003e\n            \u003c\/a\u003e\u003c\/article\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 17 — DELIVERY --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eDelivery and packaging\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            Delivery: \u003cstrong\u003eTA-Clean Whitepeaks\u003c\/strong\u003e, cleaning material for zirconium oxide sintering furnaces.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Available packaging depending on option: \u003cstrong\u003e30 g\u003c\/strong\u003e or \u003cstrong\u003e200 g\u003c\/strong\u003e.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Technical product intended for regular cleaning of zirconia sintering furnaces. The cleaning beads are for single use and must be used with an alumina crucible.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 18 — DOCUMENTS --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eDocuments and resources\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cdiv class=\"mdp-grid-3\"\u003e\n            \u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eCleaning program\u003c\/strong\u003e\n            \u003cp\u003e\n                55 °C\/min up to 1,000 °C, hold 20 min, then cooling 40 °C\/min down to 300 °C.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003cstrong\u003eQuantity per cycle\u003c\/strong\u003e\n            \u003cp\u003e\n                Use approximately 10 g of cleaning beads in a clean alumina crucible.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\u003carticle class=\"mdp-card\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0476\/7776\/7838\/files\/ta-clean_mode_d_emploi_EN.pdf?v=1790440936\" title=\"TA-Clean Whitepeaks instructions for use FR\"\u003e\u003cstrong\u003eInstructions for use EN\u003c\/strong\u003e\u003c\/a\u003e\n            \u003cp\u003e\n                Instructions for use of the decontamination material for consistent results.\n            \u003c\/p\u003e\n            \u003c\/article\u003e\n        \u003c\/div\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 19 — FAQ --\u003e\n    \u003csection class=\"mdp-section mdp-faq\"\u003e\n    \u003cdiv class=\"mdp-card\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eFAQ – TA-Clean Whitepeaks\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eWhat is TA-Clean used for?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            TA-Clean is used to clean zirconium oxide sintering furnaces.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            It removes impurities that form during sintering cycles and helps maintain more reliable sintering results.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eIs TA-Clean applied to restorations?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            No. TA-Clean is not applied to crowns, bridges or zirconia restorations.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            It is placed in an alumina crucible, then the furnace runs a dedicated cleaning cycle.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eHow much should be used per cycle?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            The instructions for use indicate approximately \u003cstrong\u003e10 g\u003c\/strong\u003e of cleaning beads in an alumina crucible.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            This quantity is intended for one furnace cleaning cycle.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eWhich cleaning program should be used?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            The specified program is: heating at \u003cstrong\u003e55 °C\/min\u003c\/strong\u003e up to \u003cstrong\u003e1,000 °C\u003c\/strong\u003e, holding for \u003cstrong\u003e20 minutes\u003c\/strong\u003e, then cooling at \u003cstrong\u003e40 °C\/min\u003c\/strong\u003e down to \u003cstrong\u003e300 °C\u003c\/strong\u003e.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            The furnace must then be allowed to cool before carefully removing the crucible.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eCan TA-Clean beads be reused?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            No. TA-Clean cleaning beads are for single use only.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            After one cycle, they must be disposed of, even if discoloration appears minimal.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eWhy do the beads change colour?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            Discoloration of the beads indicates that the cleaning process has been effective.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            It shows that the beads captured impurities during the cleaning cycle.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eHow often should the furnace be cleaned with TA-Clean?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            For optimal cleaning, regular use is recommended after every \u003cstrong\u003e10th sintering cycle\u003c\/strong\u003e.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            The laboratory may also clean earlier in case of shade defects, zirconia material changes or frequent use of colouring liquids.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eWhich defects may indicate furnace contamination?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            Furnace contamination may cause unpredictable variations in translucency and shade.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Observed defects may include whitish, opaque, green or yellow discoloration on sintered zirconia restorations.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eIs TA-Clean a medical device?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            No. The manufacturer states that TA-Clean is not a medical device.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            It is a technical product intended for zirconia sintering furnace maintenance.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\u003cdetails class=\"mdp-faq-item\"\u003e\u003csummary\u003e\u003cstrong\u003eIs a specific crucible required?\u003c\/strong\u003e\u003c\/summary\u003e\n        \u003cp\u003e\n            The instructions for use indicate the use of an \u003cstrong\u003ealumina crucible\u003c\/strong\u003e.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            It is recommended to reserve this crucible for cleaning to avoid cross-contamination with restorations or sintering beads.\n        \u003c\/p\u003e\n        \u003c\/details\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n    \u003c!-- CHAPTER 20 — CONCLUSION --\u003e\n    \u003csection class=\"mdp-section\"\u003e\n    \u003cdiv class=\"mdp-card mdp-soft\"\u003e\n        \u003ch2\u003e\n            \u003cstrong\u003eSimple maintenance to protect zirconia sintering results\u003c\/strong\u003e\n        \u003c\/h2\u003e\n        \u003cp\u003e\n            \u003cstrong\u003eTA-Clean Whitepeaks\u003c\/strong\u003e is a high-performance cleaning material designed for zirconium oxide sintering furnaces.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            By removing impurities generated during sintering cycles, it helps preserve shade stability, translucency and the quality of sintered zirconia restorations.\n        \u003c\/p\u003e\n        \u003cp\u003e\n            Used regularly with approximately \u003cstrong\u003e10 g of beads\u003c\/strong\u003e in an \u003cstrong\u003ealumina crucible\u003c\/strong\u003e, according to the recommended cleaning program, TA-Clean becomes an essential consumable for quality-focused furnace maintenance in the dental laboratory.\n        \u003c\/p\u003e\n    \u003c\/div\u003e\n    \u003c\/section\u003e\n\u003c\/div\u003e","brand":"Whitepeaks","offers":[{"title":"Default Title","offer_id":58799566520655,"sku":"809100003000","price":28.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0476\/7776\/7838\/files\/ta-clean-whitepeaks-new.jpg?v=1789596403","url":"https:\/\/www.massiliadental.com\/en\/products\/whitepeaks-ta-clean-zirconia-sintering-furnace-cleaner","provider":"Massilia Dental - Fournitures Matériel Dentaire","version":"1.0","type":"link"}